Epoxy Floor Costs in the UK

Quick Cost Breakdown

• Epoxy flooring typically costs £30-£150 per m² depending on the system and finish.
• A single-car garage (15–18 m²) usually comes in at £1,500-£3,000 fully installed.
• Commercial or decorative finishes with flake, metallic, or anti-slip coatings sit at the higher end.

Your Epoxy Floor Cost Guide

In this cost guide, we’ll cover:

1. How Much Does Epoxy Resin Flooring Cost Per M2?
2. Epoxy Flooring Cost by Type of Resin
3. Epoxy Floor Cost for Your Room Size
4. Epoxy Flooring for Commercial and Industrial Spaces
5. Ways to Reduce Your Epoxy Resin Flooring Cost
6. Find Epoxy Floor Specialists Near You on MyBuilder
7. FAQ: Common Questions About Epoxy Floor Costs

How Much Does Epoxy Resin Flooring Cost Per M2?

The epoxy flooring cost in the UK ranges from £30 to £150 per m² fully installed, with most residential jobs landing somewhere in the middle. The wide range comes down to the type of resin system, the condition of your existing concrete, and how complex the finish is.

Here's how the main cost components typically break down:

Stage	Average Cost per m²
Surface preparation (grinding, repairs, priming)	£5-£20
Epoxy resin application (materials + labour)	£20-£100
Topcoat or seal coat	£5-£30
Total installed cost	£30-£150

For a standard single-car garage, most homeowners pay between £1,500 and £3,000 all in. A basic single-coat system on clean, level concrete sits at the lower end, while multi-layer systems with decorative flake or metallic finishes push towards the top.

Note: Compared to tiling or polished concrete, epoxy is typically one of the most cost-effective ways to upgrade a concrete surface - with the added benefit of being chemical-resistant and extremely hard-wearing.

Epoxy Flooring Cost by Type of Resin

Not all epoxy floors are the same, and the difference between a £30 per m² water-based coating and a £150 per m² metallic system goes well beyond appearance.

The type of resin affects thickness, chemical resistance, cure time, and how long the floor will last under daily wear.

Here's how the most common systems compare:

Water-Based Epoxy Costs

The most affordable option at £30-£50 per m², and the most common choice for residential garages and utility rooms.

It's thinner than other systems and won't stand up to heavy industrial use, but for a home garage or workshop it does the job well. Lower odour during application makes it practical if you're living in the property.

Solvent-Based Epoxy Costs

A step up in durability and chemical resistance at £40-£70 per m². Solvent-based systems bond well to concrete and hold up better in high-traffic or wet environments. The trade-off is stronger fumes during application, most installers will need the space well-ventilated and unoccupied for 24-48 hours.

100% Solid Epoxy Costs

The thickest, most durable option available, coming in at £60-£100 per m². These systems contain no solvents or water, so what you apply is what cures - resulting in a much harder, longer-lasting surface.

The material cost is significantly higher, and application requires more skill, which is why labour charges tend to be steeper too

Flake / Chip System Costs

Coloured vinyl flakes are broadcast into wet epoxy and sealed with a clear topcoat, typically costing £50-£90 per m².

It's a popular middle-ground option, more visually interesting than a plain epoxy coat, with the added benefit of hiding minor imperfections and providing a subtle anti-slip texture. Common in garages, gyms, and light commercial spaces.

Metallic Epoxy

A premium decorative finish at £80-£150 per m² that creates a marbled, pearlescent effect. Each floor ends up unique, which makes it popular for showrooms, retail spaces, and homeowners who want a statement floor.

It's the most expensive option and requires a specialist epoxy installer to get right, as the application technique is what creates the visual effect. If you're considering a metallic finish, it's worth getting quotes from floor fitters near you who can show you examples of their previous work.

Browse epoxy flooring installers

Epoxy Floor Cost for Your Room Size

The easiest way to estimate your epoxy flooring UK cost is by the size of the space. Most installers price per square metre, so the larger the area, the higher the total, though the per-m² rate usually drops for bigger jobs.

Here's what you can expect to pay for a fully installed epoxy floor across common spaces:

Space	Estimated Cost
Utility room or porch	£250-£800
Single-car garage	£1,500-£3,000
Double garage	£2,500-£5,400
Home gym or workshop	£1,200-£4,000
Open-plan kitchen/diner	£1,500-£4,500
Small commercial unit	£3,000-£10,000

Most installers have a minimum call-out charge of £500-£800, so smaller spaces like a utility room or porch tend to work out at a higher effective rate per m².

If you've got multiple areas to cover, a garage and a utility room, for example, it almost always makes sense to get them done together.

It's also worth factoring in the condition of your existing concrete. A level, clean slab in good condition keeps costs at the lower end, while a cracked or uneven surface that needs grinding and repair work can add £5-£20 per m² on top.

If your concrete needs more than surface-level prep, our concrete floor cost guide breaks down what to expect.

The cost of epoxy flooring can vary significantly between installers, so getting at least two or three quotes for your specific space is the best way to avoid overpaying.

Find concrete floor fitters

Epoxy Flooring for Commercial and Industrial Spaces

Commercial and industrial epoxy floor cost is a different proposition to a residential garage job. The systems are thicker, the preparation is more involved, and the specifications are often dictated by health and safety requirements rather than personal preference.

• A retail unit or showroom typically costs £50-£100 per m² for a metallic or flake system.
• A restaurant or commercial kitchen runs £6-£120 per m² for a solvent-based coating with anti-slip and chemical resistance.
• Warehouses and distribution centres sit around £40-£80 per m² for a heavy-duty solid epoxy.

Why Commercial Epoxy Costs More

The higher price tag isn't just about the materials. Commercial jobs typically involve:

• Larger-scale surface preparation: Industrial diamond grinding rather than a light sand, especially on older concrete that's been patched or repaired over the years.
• Thicker application: Most commercial systems are 2–5mm thick compared to 0.5-1mm for a standard residential coat, which means more resin per m² and longer application times.
• Specialist finishes: Anti-slip coatings, chemical-resistant topcoats, demarcation line markings, and ESD (electrostatic discharge) protection all add to the cost.
• Out-of-hours work: Many commercial floors need to be done overnight or over weekends to avoid disrupting business operations, which usually carries a premium of 10-20% on labour.

Is It Worth the Investment?: For most commercial spaces, epoxy is one of the most cost-effective long-term flooring solutions. A properly installed system will last 10-20 years in a high-traffic environment, compared to 5-8 years for vinyl or painted concrete. If you're weighing up epoxy against other commercial flooring options, our commercial flooring cost guide compares pricing across vinyl, rubber, resin, and tiled systems.

Ways to Reduce Your Epoxy Resin Flooring Cost

Epoxy flooring isn't cheap, but there are some practical ways to bring the epoxy resin flooring cost down without cutting corners on quality.

• Choose a water-based system: Decorative finishes look great, but they come at a premium. A plain single-colour water-based epoxy at £30-£50 per m² does the same protective job as a £80-£150 per m² metallic system. For a garage, utility room, or workshop, that's usually all you need.

• Bundle multiple rooms together: Most installers charge a minimum call-out of £500-£800 regardless of the area size. If you've got a garage and a utility room, or a workshop and a storage area, getting them done in one visit spreads that fixed cost across a larger floor area and usually brings the per-m² rate down by 10-15%.

• Time for off-peak months: Epoxy flooring installers tend to be busiest from late spring through summer, when commercial clients are fitting out new premises and homeowners are tackling garage conversions. Booking during autumn or winter can sometimes get you a better rate, and curing times aren't an issue as long as the space is above 10°C.

• Get the concrete right first: If your slab has serious cracks, damp issues, or an uneven surface, fixing those problems before the epoxy goes down is always cheaper than dealing with a failed coating later. If you want to know more about concrete laying, see this guide on laying a concrete slab costs.

Find Epoxy Floor Specialists Near You on MyBuilder

If you're ready to get your epoxy floor laid, MyBuilder makes it straightforward to find flooring installers in your area. Post your job for free, receive quotes from local tradespeople, and compare reviews from previous customers before making a decision.

You can also browse photos of completed epoxy flooring projects, compare pricing side by side, and read feedback from homeowners who've had similar work done.

All tradespeople on MyBuilder undergo checks at registration - such as ID documents, company details, certifications for regulated jobs and skill assessments - allowing you to hire with confidence.

Find epoxy specialists

FAQ: Common Questions About Epoxy Resin Flooring Costs

How Long Does Epoxy Flooring Take to Install?

Most residential jobs take 2-3 days from start to finish. Day one is typically surface preparation, grinding, cleaning, and priming. The epoxy coats go down on day two, with a topcoat on day three if needed. You'll usually need to stay off the floor for 24-48 hours after the final coat, though full chemical cure takes around 7 days.

Can You Put Epoxy Over Existing Floor Coatings?

It depends on what's already there. Epoxy bonds well to bare concrete, but if there's paint, sealant, or an old epoxy coating on the surface, it may need to be fully removed first. Some installers can apply a new system over an existing one if it's in good condition and passes an adhesion test, but in most cases, grinding back to bare concrete gives the best result and avoids delamination later.

Is Epoxy Flooring Slippery?

Standard epoxy has a smooth, glossy finish that can be slippery when wet. For garages, kitchens, or any space where water or spills are likely, an anti-slip additive is worth the extra £3-£8 per m². Flake systems also provide a natural texture that improves grip. If slip resistance is a priority, particularly for commercial spaces, ask your installer about aggregate finishes or textured topcoats.

How Long Does Epoxy Flooring Last?

In a residential setting like a garage or utility room, a properly installed epoxy floor will last 10-15 years before it needs recoating. In high-traffic commercial environments, expect 7-10 years depending on the system and how well it's maintained. Hard-wearing 100% solid systems tend to outlast thinner water-based coatings by several years. Regular cleaning and avoiding dragging heavy objects across the surface will extend the lifespan significantly.

Is Epoxy Cheaper Than Tiling a Floor?

In most cases, yes. The cost of epoxy flooring at £30-£150 per m² installed compares favourably to floor tiling, which typically runs £40-£120 per m² for materials and labour combined, and that's before you factor in underlay, grout, and the longer installation time. Epoxy is also faster to install and has no grout lines to maintain. The main trade-off is that tiles offer more design variety and a warmer feel underfoot, so it comes down to the space and what you're using it for.

Can Epoxy Flooring Be Repaired?

Yes, and that's one of its advantages over tiles or vinyl. Small chips and scratches can be touched up with a patch kit for under £50, and localised damage can be sanded back and recoated without redoing the entire floor.