Skip to main content

Ready to hire?

Post your job in minutes, browse real reviews and choose who to speak to.Post a job

Need some tips or advice?

Ask a question
Electrical

Random Clicking Noise in Lounge Circuit or Appliance

Anonymous user 16/11/2026 - 8.35 AM

Hi all, has anyone had experience where a random clicking noise can be heard from either an electrical circuit or appliance. The noise can be heard at random times in our lounge area, sometimes it’s repeated clicks in succession or just single loud clicks, then it’s not heard for a while. It’s difficult to pinpoint as the lounge is all open plan and you get a slight echo. We originally thought it was the room thermostat clicking in and or the fridge freezer compressor making a noise, which they both do, or maybe expansion and contraction of patio doors with the cold. Could this be a faulty socket / USB socket or something else? Or related to the earth missing fault we also have at 2 sockets in the rear ring main. Can usb sockets fail and produce a clicking noise. All sockets are MK. Any advice welcome on how to approach and eliminate. Thank you.

2 Answers

Ventoux Electrics

Rating: 5 out of 5
Alton
Hi, could be arcing of a loose connection, you could try isolating the sockets and see if the sound disappears, but ideally you need an electrician to investigate as Arcing can cause fires. If the installation is old, check the Consumer unit (fusebox) for a last inspection sticker, this will tell you whether it's due an inspection, normally every 10yrs domestically. Even with a new board Arcing may not trip an RCD (Residual current device), although AFDD (Arc fault detection device) should, PATesting could eliminate faulty equipment this could be checked also, so best get this investigated ASAP. Best Advice have an EICR to check whole installation if old. Hope this helps Simon
Answered16 November 2026
0

E3 Electrical

Rating: 4.9 out of 5
Winscombe
I'm not sure any electrical fault would cause clicking, and it would be difficult to pinpoint from a message. My concern is that you have two sockets without earth connections; the earth cable is an integral part of the safety system. My suggestion is to have the sockets inspected by an electrician, and while they are there, they could advise on the noise.
Answered16 November 2026
0