Ready to hire?
Post your job in minutes, browse real reviews and choose who to speak to.Post a jobNeed some tips or advice?
Ask a questionGroundwork & Foundations
Fitting inlet hopper to existing clay/terracotta gully
Danny kay 16/11/2026 - 8.34 AM
I'm fitting a "FloPlast 110mm Terracotta Rectangular Drain Inlet Hopper". The existing underground drainage is an older clay/terracotta gully, approximately 160mm internal diameter and 240mm external rim diameter, I need a suitable adaptor or reducer to connect the new 110mm plastic hopper outlet securely and watertight to the existing clay drainage. Be much appreciated is someone can give me a link on what adapter/reducer is best. Thanks
Are you a tradesperson and able to answer this question?
1 Answer
Ransom Geoffrey Toby
Rating: 4.7 out of 5
Hi, your clay pipe sounds like 150mm (6"), so measure the outside of the spigot to be sure. The easiest fix is a flexible clay-to-plastic reducing coupling, 110mm to 150mm, with stainless clips. Tighten them evenly and it will be watertight. Failing that, a rubber reducer sleeve works the same way. Any good plumbers’ or drainage merchant will have them. Bed the hopper level on a sand and cement mix and keep the fall.
Answered16 November 2026
0