Skip to main content

Ready to hire?

Post your job in minutes, browse real reviews and choose who to speak to.Post a job

Need some tips or advice?

Ask a question
Plumbing

Mixer shower

Matthew James Webb 17/11/2026 - 9.12 AM

Hello i wander if anyone can help im looking at replacing my mixer shower but have some issues all the shower im finding are saying that the mixer connects to the hot on the left and the thermostatic on the right my shower is the opposite the thermostatic is on the left and is attached to the hot water and mixer on the right.

6 Answers

Scunthorpe Handyman

Rating: 5 out of 5
Scunthorpe
Just to clarify, do you mean the hot pipe actually enters the shower on the right? or just that the temperature control is on the left? Most thermostatic bar showers are hot feed left, cold feed right, but the controls themselves can be arranged differently depending on the model. If your actual supplies are reversed, that changes what replacement will work If your hot feed is left and cold feed right then you should be fine to replace with any model
Answered18 August 2026
1

Handiymenn Ltd

No reviews yet

Northampton
Hi Matthew I hope this may help, your query is slightly unclear however, the standard placement of hot and cold is universal amongst most sanitary (bath, basin and shower) inlets. The only way to allow for successful replacement is to modify the pipe placement ( Hot on the left and cold on the right). This may vary in difficulty depending on your specific setup; if your local we’d be happy to advise and help.
Answered13 August 2026
0

Watermatic Private Limited

Rating: 5 out of 5
Morecambe
You can usually solve this without changing the existing pipework in the wall. If your hot water is on the right and cold is on the left, you simply need to make sure the shower valve you choose is designed to work with reversed supplies. A standard thermostatic bar mixer may not work correctly because the hot and cold feeds are entering the wrong sides. There are three main options: 1. Buy a reversed-inlet thermostatic mixer – This is probably the easiest and neatest solution. It is designed specifically for hot-right/cold-left pipework and can normally be fitted directly onto the existing 150mm centres. 2. Use a reversible cartridge – Some manufacturers offer thermostatic cartridges that can be changed or repositioned to accommodate reversed supplies. It is worth checking the specific model before buying. 3. Mount a standard mixer upside down – This can work as a budget solution, but it isn’t ideal. The shower outlet and temperature markings may end up facing the wrong way, and you may need an elbow to redirect the shower hose. Overall, the best option is usually a thermostatic bar mixer specifically designed for reversed hot and cold feeds. It avoids disturbing the existing pipework and gives you a much cleaner and more professional installation.
Answered17 August 2026
0

Anonymous user

Hi this is not an issues,its the connection was done on the wrong side and you dont need to worry about it.You will have have cold & hot water.
Answered17 August 2026
0

KB Plumbing & Property Services

Rating: 5 out of 5
Harwich
Pipes could be altered for hot and cold to be on correct sides, some showers like Mira allow for cartridge to be adjusted to allow for hot on right cold on left
Answered9 November 2026
0

Richard Brown Heating & Plumbing

Rating: 5 out of 5
Macclesfield
You can now buy bar mixer showers specifically for this situation.
Answered17 November 2026
0