Bathroom fitting

Your answer is generally yes. However there are things to consider. Firstly, are you wanting to install a sink where no water or waste are currently available? if your answer to this is yes then you need to consider where you are going to take your water supply from and how and where you are going to tap into the waste, do you need to drill through walls to reach an external waste and water supplies etc. Alternatively if you are removing one sink to replace with another then the job is relatively simple, but there are still things to consider, such as how its mounted, new taps , water isolation, and size of waste which may differ from the original. also you the pipe work this is rarer now days but you can still find Lead pipework in older houses, which will need to be replaced. Alternatively if you would like a free quotation then please contact us directly. I hope this helps. Best regards Dronfield All Trades

Yes, absolutely

Totally. Very straightforward job. I would do the sink and toilet in less than a day.

Hi! Usually yes But it depends as we don’t know exact job details and requirements.

Yes u can

Providing an accurate response is challenging due to insufficient information. If the initial fix has already been installed and tiled, then certainly, this is feasible. However, if the scope involves a complete installation, such as a family bathroom, then no, it is not. However, if the location is an existing cloakroom toilet and the task involves adding hot and cold water pipework, waste pipework, with a few tiles above a new basin, then in most cases, this can be accomplished within a single day.

Yes, it can be done in one day. If all the necessary materials and connections are ready, I can install the sink, connect the water and waste, seal everything properly, and check for any leaks.