What tools we need for fixing plywood

What are you fixing the plywood to?

Dependent on what your fixing the ply to : nail gun or drill

Depends what plywood it is and where it is getting fitted to Nailed or screwed

All depends on what you’re fixing the ply to. If you’re fixing it to timber you can either screw it with a drill or impact. Or nail it with a nail gun or the old fashion way nail it with a hammer. However if you’re fixing the ply to block work, then you’ll need an Sds to drill into the block work as well as a drill and impact for the screws. You’ll be able to use concrete screw or normal screws with red or brown plugs. Hope this helps.

You will need a jigsaw or circular saw then screws. Depending on how you will use it.