Tenement close painting

You must ask yourself why is the paint flaking find the problem once solved scrap of all flaking paint use a sealer once dry then face feel all bad areas once dry sand all walls and floor seal the filler then mis coat over all areas then top coats with a strong paint dulux diamond mat

Hey there, Renovating an early 1900s Glasgow Tenement close can be a rewarding DIY project, especially when you have a team of handy residents! Here's a basic guide for the materials you'll need: 1. **Wall Preparation**: - **Filler/Plaster**: For the bubbling and damaged plaster, use a good quality filler or plaster repair compound. Something like a multi-purpose wall filler would be ideal for minor repairs. For larger or deeper areas, a plaster bonding agent followed by a finishing plaster may be needed. - **Primer**: Before painting, apply a high-quality primer suitable for old plaster to ensure good adhesion and to prevent further bubbling or peeling. 2. **Paint for Walls**: - **Gloss**: For the lower half and stripes, use a durable, high-gloss paint. It’s easy to clean and resistant to scuffs – ideal for high-traffic areas. - **Matt**: For the upper walls, a matt emulsion is suitable. It helps hide imperfections and gives a modern finish. 3. **Floor Paint**: - For the poured concrete floors, use a specifically designed floor paint. It should be durable, resistant to foot traffic, and suitable for concrete surfaces. A non-slip option might be a good idea for safety. 4. **Additional Tips**: - Make sure to properly clean and sand down surfaces before applying new paint. - Always test paint colors and finishes in a small, inconspicuous area first. - Ensure good ventilation while painting, especially with gloss paints. If you need any assistance or professional advice, Steep Handyman and Cleaning Services is here to help. We have experience with older properties and can provide guidance or even take on the project if it becomes overwhelming. Let’s bring new life to your Tenement close together!

I understand your desire to spruce up your 1900s Glasgow tenement close! While some DIY is possible, renovating communal areas in a listed building comes with specific considerations and potential risks. I highly recommend approaching this project cautiously and following the proper steps to ensure a safe and satisfactory outcome. Process: Preparation is key: Thoroughly clean all surfaces, removing loose paint, dirt, and grime. Address any underlying moisture issues to prevent future problems. Repair damage: Fill small cracks and holes with appropriate filler. For larger areas or damaged plaster, seek professional guidance. Prime surfaces: Use a suitable primer to seal the surface and promote paint adhesion. Paint: Apply multiple thin coats of your chosen paint, following the manufacturer's instructions.

Get it checked for rising damp first