Removing wall with radiator and pipes to another radiator in another room

get a qualified plumber to alter the pipework runs before you remove the wall.

Before proceeding with removing the wall, it's essential to follow these steps to ensure the radiator in the other room remains functional: 1. *Consult a Professional:* Contact a qualified plumber or a heating engineer to assess the feasibility of relocating the pipes and radiator. They can provide expert advice and create a plan for the relocation. 2. *Turn Off Heating System:* Before starting any work, turn off the heating system and allow the radiators to cool down. This will prevent any potential accidents or burns during the removal process. 3. *Disconnect and Cap the Radiator:* If the radiator on the wall to be removed is connected to the same system as the other radiator, it will need to be disconnected and capped off. This ensures that no water leaks occur during the wall removal. 4. *Relocate Pipes:* The plumber or heating engineer will need to redirect the pipes from the original radiator's location to the other room where the radiator will remain in use. This may involve running new pipes along the new wall or through the floor or ceiling, depending on the layout. 5. *Install New Radiator:* Once the pipes are relocated, a new radiator can be installed in the room where the original radiator was removed. The plumber will connect the new radiator to the redirected pipes. 6. *Pressure Test and Bleed:* After the installation, the system should undergo a pressure test to ensure there are no leaks. The plumber will also bleed the radiators to remove any trapped air. 7. *Complete Wall Removal:* With the pipes and radiator connections redirected, you can now proceed with removing the wall. Ensure it's done safely and by following any necessary building regulations. 8. *Final Checks:* After the wall removal, the heating system should be turned back on to check that both radiators are functioning correctly and providing sufficient heat. Remember, this type of project involves complex plumbing work, and it's crucial to have a professional plumber or heating engineer handle the task. DIY attempts without proper knowledge and experience can lead to water damage, leaks, or inefficient heating. Always prioritize safety and consult qualified professionals for such modifications to your heating system.

Dear Octavia, the pipework of the radiator you are moving, will need to be re-routed and joined to the rest of central heating system. This is a job for a plumber and you will find one easily on the platform.

Get a plumber