Is it possible to fit an integrated dishwasher in a cupboard of new build kitchen?
Anonymous user 03/03/2024 - 3.46 PM
Hi, I want to fit an integrated dishwasher into a cupboard in a new build home. That space is next to the sink, it got socket and also water supply and drain under the sink. Just because I didn’t go for the dishwasher option the developer offered, now that space is a cupboard with shelves.
I’m not sure in this case, is it possible to fit an integrated dishwasher? Would a plumber capable to do this? If that’s possible, normally how much would it cost?
Thank you so much!
Are you a tradesperson and able to answer this question?
You would have to remove the carcass and slide the dishwasher into place, once in you will be able to put the door on, usually the dishwasher will come with a template to make it easy for you, all east enough for the plumber to run the pipe through
Answered29 June 2023
0
Anonymous user
The dishwasher will not fit into the cupboard you would have to remove the cupboard and just use the door, that’s assuming the cupboard is 600mm
Yes, once shelves etc removed it should slide into the recess then fit the door to your integrated appliance. Measure the recess first to establish the size of dishwasher you need. Not sure of cost, depends what area you live in
Here is a guide to what you have to do:
1. Remove the unit you have in place. (usually, it's held together with screws to the other units)
2. Measure to confirm the size of the dishwasher you will need. (measure the inside width)
3. Remove the hinges from the door of the unit.
4. Order the new dishwasher if you didn't.
5. Make holes where necessary for the pipes and power supply (or ask a plumber/ kitchen fitter to do so)
6. Read the fitting instructions (many people do not and they forgot to fit the fixings)
7. Slide in the dishwasher making sure the waste pipe and power supply going where they should.
8. Lift the dishwasher using the legs to tight up to the worktop (read the instructions)
9. Secure the dishwasher with the fixings. (usually top left and right)
10. Fit the door using the template provided and following the instructions.
(I will highly suggest that if you haven't done anything like this before you hire a professional).
It can be done. Before you go ordering any dishwasher you want to make sure you get all the measurements correct or it will be a wasted visit for the fitter/plumber. So first make sure measurements are correct, make sure you have drainage and water supply available near by and power socket that is a suitable place. Then call a fitter/plumber/handyman and they'll get it sorted for you. Even if there is not plumbing, electrical socket near by and even if you haven't got the dishwasher at the ready this can all be sorted by a fitter but you would obviously be paying more for the services.
