Skip to main content

Ready to hire?

Post your job in minutes, browse real reviews and choose who to speak to.Post a job

Need some tips or advice?

Ask a question
Electrical

Thermostat wiring options

Anonymous user 28/02/2024 - 4.06 PM

Hi, we moved into our new build flat 11 years ago. At the time the combi boiler was a Sime and the thermostat was a battery operated Sime thermostat with a receiver unit connected to the boiler. The boiler gave us nothing but trouble and we got it replaced with a Worcester Bosch Greenstar 8000 a couple of years ago. When they replaced it they installed a new Honeywell T3R thermostat and receiver unit. The thermostat is playing up though, it keeps resetting and wont talk to the receiver unit until you go through the time/date setup so looking at replacing it. Behind the old Sime thermostat (it's still on the wall) there's four wires in a grey flex. It's never been used so I can't see what colour the wires are. And next to the boiler, just below the power cable for the boiler, there's a blue wire and brown wire in a grey flex connected to one end of a wire connector and nothing on the other end. Does this sound like it's set up for a mains powered thermostat and that the four wires would be brown and black for the switched live and the other two wires would provide the power for the thermostat. Does this sound right?

Are you a tradesperson and able to answer this question?

2 Answers

DMElectrical

Rating: 5 out of 5
Winchester
Hi there it all depends (this is to answer your specific question -'Does this sound like it's set up for a mains powered thermostat and that the four wires would be brown and black for the switched live and the other two wires would provide the power for the thermostat. Does this sound right') So to answer this- a neutral and then 230 volts permanently on another core/wire (wiring colours installed for a property that is the age of yours are likely to be incorrect after the condition you describe the wiring in) so it would need to be carefully and correctly assessed for function (in this case 230 volts) - if you do and it is in the right location then you are good to go, if not then, well, you aren't good to go. Hope this helps. You really need to have the wiring tested correctly first, colours are not an accurate indicator at this stage - untested its guesswork.
Answered21 February 2023
8

D WILSON

Rating: 5 out of 5
Penrith
Just fit a hive mini ! for a combi...end of, the existing 4 core will be an old feed to analogue stat....but its a new built 11 years ago right??domestic electrics never changes
Answered22 February 2023
0