Wiring for Vortice Quadro Super I GB Fan

Hi if it's the extractor fan for bathroom then all you need is a 3 core and earth cable with a 3 pole isolator Take power supply from bathroom light so it switches on with bathroom light Because it needs permanent line for the timer

Hi, if you're still not sure. As said above, you just need to connect the 3 core cable from lights switch or pole isolator to the corresponding sections as shown in the diagram from the manual. Keeping in mind the constant live wire needs to be on the timer circuit. Otherwise it's just going to keep running regardless if the light is switched on or off. Not everyone will find they have a 3 pole isolator but if you do then I have attached a link to a video to help. Assuming this is your model - Go to page "59" https://www.vortice.ltd.uk/wp-content/uploads/2019/12/12223_Instruction_Manual.pdf Isolator and fan wiring. It is very detailed https://www.youtube.com/watch?v=KxH_FM03cMs

Yes if I was you I would employ an electrician to do the job