Ready to hire?
Post your job in minutes, browse real reviews and choose who to speak to.Post a jobNeed some tips or advice?
Ask a questionPlumbing
Triton florini concentric thermostatic mini mixer shower temperature
Anonymous user 03/03/2024 - 3.44 PM
Just replaced old triton shower with above (both look pretty much the same) and max temperature too low - water coming from shower only luke warm even when I turn spindle on valve as far as it will go. Haven’t fitted controls or the max temperature limiter yet. Is there anything more that can be done to valve to increase temperature? Do these spindle valves have a temperature screw in them that can be used to vary temperature range? The spindle itself will not turn any further
Are you a tradesperson and able to answer this question?
1 Answer
IRM Plumbing
Rating: 5 out of 5
ADJUSTING THE MAXIMUM
TEMPERATURE SETTING
The maximum temperature stop is factory set to
38°C, this can be adjusted during installation.
Note: Before fitting the levers the
maximum temperature should be checked
on-site to guarantee user safety.
The mixed water temperatures must never
exceed 46°C at terminal fitting.
The British Burns Association recommends 37°
to 37.5°C as a comfortable bathing temperature
for children. In premises covered by the Care
Standards Act 2000, the maximum mixed water
the outlet temperature is 43°C.
To adjust the maximum temperature setting,
remove the temperature control knob.
Allow the water to run until the temperature has
stabilized, adjust the temperature control spindle
by hand (fig.22).
When the shower temperature is satisfactory
turn off the shower.
for fig.22 access the link bellow
https://www.tritonshowers.co.uk/amfile/file/download/file/1141/product/2862/
Answered29 October 2022
6