Ready to hire?
Post your job in minutes, browse real reviews and choose who to speak to.Post a jobNeed some tips or advice?
Ask a questionKitchen Fitting
Silicon between the worktop and the upstand
Anonymous user 16/03/2024 - 2.44 PM
The instructions fir fitting the upstands to the worktop instructions the use of 2mm shims under the upstand to take the silicon. What is the best way to apply silicon and achieve a good to perfect finish.....
Are you a tradesperson and able to answer this question?
5 Answers
Peter's job
Rating: 5 out of 5
Using a Sealant Finishing Tool from any shop will do the job
Answered5 October 2021
7
IINVEST-HOME BUILDING LTD
Rating: 1 out of 5
Use a proffesional to get best results
Answered6 October 2021
0
SLS Installations
Rating: 5 out of 5
A professional sealant tool or a professional with experience.
Answered6 October 2021
0
Deftmen Ltd
Rating: 5 out of 5
Use a professional sealant finishing tools and you won’t have any issues.
If you are not confident then look for someone professional to do it.
Answered12 October 2021
0
Jackson Merrick Designs Ltd
Rating: 5 out of 5
1. Ensure all surface are free of dust by cleaning down with a multi-surface wipe.
2. Decide of the size of bead you want to apply - I find a 5mm bead is generally appropriate for this situation.
3. Cut the nozzle on your silicone to approximately the same diameter as the bead you want to apply.
4. Run your bead along the joint using even pressure and a nice steady motion
5. Use a silicone finishing tool (such as "Fugi") to finish the bead, wiping the tool regularly with kitchen roll.
If you are new to silicone finishing, don't run more than 2-3m of bead at a time and try not to overwork the silicone - 1-2 passes with the tool should give a good finish.
Answered12 October 2021
0