Skip to main content

Ready to hire?

Post your job in minutes, browse real reviews and choose who to speak to.Post a job

Need some tips or advice?

Ask a question
Plumbing

Very noisy loft water pump and new water cylinder...

Anonymous user 09/03/2024 - 3.24 PM

We had a new boiler and water cylinder replacement fitted a month ago still with the old pumps. According to my stepdad, we have two different pumps, one each for our both upstairs showers. We rarely often shower at the same time. The extremely loud noises hear, are the loft pumps vibrations every time upstairs showers are turned on. This noise was the same as before, but not as loud with old system but with the new system installed, the actual cylinder inside landing airing cupboard, a few seconds after noise from a loft pump kicks in instantly from a shower turned on, then the cylinder makes a weird motor noise also, my stepdad believes this could be air lock after having new radiators installation a few days ago. Unfortunately a different plumber to boiler/cylinder installation, forgot to double check system air locks. Seems like it’s coming from or through the large silver bolt on top of cylinder, that never sounded with the previous cylinder. Cannot tolerate these loud noises just for having a shower, doesn’t make sense and please can some professional info me is this normal or can stop the noise please? I checked online for The Salamander CT Force range. I wondering if possible can use a twin pump for two showers, instead of having two bumps for both showers?

Are you a tradesperson and able to answer this question?

2 Answers

Anonymous user

Hello , Noise can be up to 60 decibels which can be very loud on pumps , if you wish there are products that eliminate noise , I always instructed engineers to lay a pump on a underlay base to stop vibration . Are you multiple showering at the same time the recovery noise of water could be added noise .The Salamander CT Force range is one of the quietest pumps.
Answered25 August 2021
3

ABS Plumbing

Rating: 5 out of 5
Mansfield
If the shower/water pump is situated in the loft it may be drawing in air making the pump noisy. The manufacturer's preferred installation position is at the base of the hot water cylinder. Salamander pumps are noisier that their Stuart Turner counterparts. Most plastic ended pumps are noisier than brass ended units. The pump should be mounted on a solid surface that cannot resonate and thereby increase the noise. Carpet underlay doubled up can absorb some of the noise and is considerably cheaper than sound absorption mats sold by pump manufacturers.
Answered4 September 2021
0