Ready to hire?
Post your job in minutes, browse real reviews and choose who to speak to.Post a jobNeed some tips or advice?
Ask a questionPlastering & Rendering
Uneven Fillers in wall
Anonymous user 23/02/2024 - 3.40 PM
I removed the wallpaper and filled it using a filler (I did a terrible job). I painted over it using a primer undercoat then i have painted over that using normal paint, but the area is still very lumpy I need help getting rid of the lumps please so i can have a seamless finish after i paint again. What would you advise please?
Are you a tradesperson and able to answer this question?
4 Answers
a j reid plastering
Rating: 5 out of 5
Remove filler ,refill with hardwall and skim.thanks
Answered7 June 2021
6
Anonymous user
Hi try a course sand paper to get it down then as you get near level use a lighter grit sand paper
Answered5 June 2021
0
D Webb Plastering
Rating: 5 out of 5
Scrape filler back pva whole wall and plaster full wall. Pay a plasterer for a good finish.
Answered17 June 2021
0
T.K.M Construction
Rating: 5 out of 5
Remove the filler then use a watered down pva solution on the holes and uneven sections then using bonding coat to fill holes and uneven sections if they are deep then plaster over it or if the holes and unevan sections are not that deep use easy fill then sand it down once its dry and then paint it. Or as stated above skim the full wall that way you ensure a smooth flat finish all over
Answered23 June 2021
0