Painting over lead

kingfisher lead flashing sealant paint

Acrylic-silicone, water-based lead paint with excellent adhesion to the substrate. Before painting, the surface should be degreased using known methods. After degreasing, apply the paint with a pneumatic spray or brush. It is recommended to apply two coats of paint. The first coat dries at ambient temperature for approximately 1 hour. After drying, a second layer can be applied. The drying time can be shortened in a heating tunnel at a temperature of 35-40 0 C. Painting works should be carried out at an ambient temperature of not less than 10 ° C and not higher than 30 ° C. Use water to wash the painting tools.

A specific paints called encapsulants should be use during the process with the necessary steps to ensure the job is done correctly ✔️. So you and everyone are protected from the potential dangers of lead paint and lead dust

Bedec map or Bedec barn paint,can use on bare lead or previous painted lead. Microporous breathes and contracts with all weathers no primer needed. Dries in 20 mins recoatable in 2 hours. W/B product .