Skip to main content

Ready to hire?

Post your job in minutes, browse real reviews and choose who to speak to.Post a job

Need some tips or advice?

Ask a question
Plumbing

Combi Plus Hot Water Tank - for running multiple showers?

Anonymous user 16/03/2024 - 2.39 PM

We currently have an old style traditional boiler set up, which includes a hot water tank, cold water tanks in the loft and heat only boiler. We also have a pump on the hot water which provides a good pressure for a power shower. The problem we currently have is we sometimes run out of hot water, or dont have any hot water for a shower in the afternoon when we havent thought ahead and heated the water I would like to keep the power shower in our en-suite at least, but would also like instant hot water if required, and the option to run two showers at the same time. I'm not sure what is the best solution. I was thinking of installing a combi boiler and hot water tank. The hot water tank would provide our ensuite allowing us to have a power shower, and the combi would supply the rest of the house. I've also seen combi boilers with a built in tank, but not sure there would be enough water for all our needs. Another idea is a combi boiler connected to a accumulator to speed up the cold water supply to give power shower pressure coming from the combi, not sure if this would work with two showers Obviously cost is also important, but priority is a power shower in the en-suite and ability to run two showers at the same time Any advice would be appreciated

Are you a tradesperson and able to answer this question?

4 Answers

Trading as N Thorne

No reviews yet

Romney Marsh
An unvented hot water storage cylinder could be an option Works of mains pressure to all taps and giving good pressure for showers
Answered3 January 2021
3

Anonymous user

If u have good mains water pressure u only need to convert the tanks in the loft to mains and fit a decent sized combi for demand of hot water to be honest with u sounds complicated the way u have explained to me but in fact it’s very simple if u don’t on the other hand have mains with a good pressure a pump boosted cold to run the combi does the same
Answered3 January 2021
0

RJF Plumbing, Heating & Mechanical Services Ltd

Rating: 5 out of 5
Bedford
Sounds like you have more than one or two showers so a combination boiler would not meet your needs, If you have sufficient mains water pressure switch to an unvented cylinder probably 250 litres in place of your existing cylinder
Answered3 January 2021
0

Plumbing and heating

Rating: 5 out of 5
Dundee
An unvented cylinder would be ideal for the amount of shower or baths you have . I have a unvented fitted to my house which has three showers and a bath and the pressure I get form shower is really good . Plus you need to check your getting good pressure from your water mains before you install an unvented cylinder
Answered24 January 2021
0