Special size fence panel.

Hi, normal fence panel is 6ft wide so all you need to do is cut down to the size you wont, then fit bantan back on the cut end, quick and easy to do good luck colin.

Use a six foot panel. mark top and bottom the desired width. Move end battons from front and back and refix. Cut down side of batton , and you will have the panel you need.

hi if your gap is few inches more than a 5" panel get some battens to fix on the post or the end of each panel to give ou the few inches extra simply in 12 years i never heard of larch lap panel 7" wide peter

You can have a panel built to whatever size you want but these days fencing contractors will not entertain it. They will usually use an extra post and cut down 2 panels to suit. we used to be able to build them to 8 foot wide but these were specials and expensive. I have just priced a job where they had 7 foot wide larch lap panels with timber posts and I said I would only use 6 foot panels so it would be extra posts and panels to bring it into line with today's standards.