Skip to main content

Ready to hire?

Post your job in minutes, browse real reviews and choose who to speak to.Post a job

Need some tips or advice?

Ask a question
Carpets, Lino & Flooring

Removing old York stone kitchen floor and installing a new floor?

Anonymous user 23/02/2024 - 3.36 PM

Hi, About to install a new kitchen which currently has an old York stone floor; the condition of it is very poor and beyond conceivable repair so we want to remove it. The house was built in circa 1890. The floor butts up against an original wooden floor in an adjoining room which we have had refurbished. The stones are 2" thick so we have a bit of height to build up. We would like to lay tiles on the final floor (to same level as wooden floor) so my question is what is the best solution? With the house being the age it is, we don't want to create a potential damp issue so that has to be taken into account, although the cellar itself is dry. Not a big room, approx 7ft x 11ft. Any thoughts would be much appreciated. Cheers, SD

Are you a tradesperson and able to answer this question?

1 Answer

Anonymous user

Hi, If under the stone is earth then the earth should be removed to a depth to allow -100 mm type1 (hardcore) 50mm blinding sand- DPM- 100mm Concrete- 75mm screed and then the thickness of the tile and adhesive. So removal of approximately 13 inches plus finished tile and adhesive.
Answered2 November 2020
11