CCTV Installation

Running cables down the back of a drain pipe is an awful way of installation as cables are exposed! I don’t see any problem with cctv fitted in eaves! The correct spec of camera would provide adequate coverage! Should you wish to install lower on the wall I advise using conduit which would protect the cable from weathering or vandals/thrives cutting the cable!

Directly under the eaves isn't an ideal position I would say this is a lazy way of domestic cctv installation as any camera installed at this height really only picks up the top of peoples heads, it's really only an overview, during my installations the cable will come from the eaves down the back of the drain pipe using white, black or brown cable ties to suit the colour of the drain pipe, the camera is then fitted at a lower level to get a good image face on also distinctive clothing. I hope this answers the question

OK while you have the roof off take the opportunity to put in a nylon draw string from under the eaves where the camera may be positioned. Secure the nylon string under the eaves with a large knot so it cant be accidentally pulled out, now ensure that nothing snags it in the roof space IE nails, wood, or other objects and tie the other end up as high as you can under the top of the roof truss inside your roof. Do this for every camera position you may want in the future. The string should move freely on either end if pulled. When your CCTV company comes out to install your system you will save them a lot of time.

Depending on your type of house ie new build caviry walls can be used to conceal cctv cables within. Installing cctv cameras under the eves gives an overview of the situation but from an evidential point of view it isnt the best position. Camera positioned midway up the house allows a better angle to help in the identification process. For example you can have the system connected to a bedroom tv to save on buying a monitor and the camera mounted outside at bedroom floor level the cable can then be concealed in the wall.Or the NVR in the loft , the cable fed down the upstairs cavity and fed through the wall at the desired level. This type of install takes longer but its a better job.

For the clients question, without any regard to camera height/positioning the best idea would be to lay Cat5e/Cat6 cabling to the positions where you would like cameras to be positioned, if getting the system installed in the near future 22mm holes can be made with the cabling pushed out ready for termination/testing and comissioning. Qadeer - Smart CCTV Systems LTD

Depends on building house ext ie new build cavity walls can be used to conceal cctv cables within. Installing cctv cameras under the eves gives an overview of the situation but from an evidential point of view it isnt the best position. Camera positioned midway up the house allows a better viewing angle to help in the identification process and still at an height wear ladders are reg Using cat cable allows the cable blend and be hidden if cavity not available

Your best option would be to install the cameras at the correct and recommended height as per camera specs, NOT on the eaves, avoiding installing cameras at such height means you will be getting the best range and the best resolution at a further distance if you install the cameras lower. Run the cables straight through the wall, channel out the plaster internally and re-plaster the cable runs in once installation is complete. Other than that you can install them in the eaves but its not recommended. If Installing them in the eaves as a solution to hiding cables, your compromising footage quality over aesthetics, which isn't a problem if your system is purely a deterrent, but if you intend to or will want to use the footage in court etc (hopefully it doesn't get to that situation) the footage needs to be legible, then install them correctly based on the specification of the camera and to hide cables it can be done as described above - using conduit externally is not going to be an option if you don't like the idea of cable runs being visible

If you prefer to use wired CCTV cameras, there are a few things you can do to ensure a minimal intervention during your roof refurbishment: Plan ahead: Before you begin your roof refurbishment, consider where you would like to install your CCTV cameras and try to incorporate the necessary wiring and cables into your design. This will allow you to run the cables through the walls or attic, rather than having them exposed on the outside of the building. Use conduit: If you need to run cables outside of the building, consider using conduit to protect the cables and make them less visible. Use a professional installation service: If you are not confident in your ability to install the CCTV system yourself, consider hiring a professional installation service. They will have the expertise and experience to ensure a smooth and minimally invasive installation. I hope these suggestions are helpful! Let me know if you have any other questions

Installing CCTV cameras on the eaves is a perfectly acceptible way of mounting CCTV cameras as long as the correct camera is selected for the job that is intended. However if a camera is required to be mounted lower, for example to achieve facial recognision at a door, there are a couple of options. Depending on the age of the building, it may be possible to 'fish' cables from the loft using the cavity between the internal and external walls. This can be quite tricky and generally requires 2 people. Failing that, another option is to run cables behind drain pipes. This isn't a prefurred option as it can leave cables exposed and vulerable, but can help minimise unsightly cables being on show. A site visit and assessment would need to be carried out by a professional to assertain the best solution for you. I hope this helps :-)

Yes, there are a few things you can consider to make your future CCTV installation easier and more unobtrusive. Here are some suggestions: Consider installing conduit or cable ducting during your roofing refurbishment to provide a protected path for your CCTV cables. This can help to avoid the need for unsightly surface-mounted trunking or cable clips later on. Think about where you want to position your cameras and plan the cable routes accordingly. For example, if you want to place a camera at the front of your property, you may want to run cables down the front corner of your house to avoid having to cross over the roof. Consider installing a power supply near each camera location. This can help to reduce the need for long cable runs and make the installation process quicker and easier. Think about the type of cameras you want to use. Wireless cameras can be a good option if you want to avoid running cables altogether, although they do require a reliable Wi-Fi signal. If you're unsure about any aspect of your CCTV installation, it's always a good idea to consult a professional installer who can provide expert advice and ensure that your system is installed correctly and safely.

Wireless camera is the easy way and no cable needed

Hi, Personally I would run Cat5 cables to the locations of intended camera locations back to the area you intend for the NVR to be located. If the NVR would to be located in the loft area this would minimise cable runs. Cat 5 or an IP based CCTV System would give you much better picture quality and the same cable would power the cameras so no need for power supplies. In this instance the worst cable runs would be from the loft area to the router. A smart TV would give you access to images VIA the WiFi connection to the router. Wireless CCTV is easy until you need to change batteries at heights. No fun at all. If you need further advice please feel free to get in contact. Regards, Paul Foster Rhino Fire + Security