Choosing wires for rewiring a chandelier

Hi Anne-Charlotte, Here’s a quick google search link. Hope this helps you on your mission. Also if you use a very small cable as a draw wire to push it through the arms and then tape the chandelier cable to that and pull it slowly this may help getting the cable through the narrow spots. May take a few attempts but you’ll get there. https://www.ebay.co.uk/itm/2-or-3-core-PVC-transparent-clear-electrical-cable-flex-wire-0-50mm-to-0-96mm-/322907561635?_trksid=p2385738.m4383.l4275.c10&var=512031243631 Good luck, stay safe Vish, VDN Electrics Limited

Hi Anne, I have rewired many chandaliers and they can be complex I wouldn't attempt this unless you can competently test the finished item as pulling fine cable through narrow holes could cause a risk, then the finished item should be at the very least PAT tested for your own safety, also depending on the lamps used you should calculate the size of cable to use and the correct termination, if it's a big item I'd leave it to the professional Kind regards Andy ATM Electrical

I would just like to mention that after you have managed to get the wire's in place they will require a insulation test to check for damage to the cable insulation or there is a risk of electric shock.