What kind of material is render?

Traditional render was sand & cement applied with a trowel, however, modern day renders can be of a textured finish applied from a tub using a trowel and finished with specialist tool to give the desired finish a number of these modern renders come in various colours

Render is a mixture of sand & cement. It is applied to the wall like plaster. There are different types of sand, you have very fine sand like kiln dried sand & silver sand. Then building sand which is a bit courser which is used for building walls then rendering sand which a bit more course, then you have grit sand which is used for concreting.

Its usually a 3 to 1 rendering sand and cement mix with a waterproof additive , plasterboard should not be used on the exterior of a building

Render is a layer of sand and cement mix that is usually mixed with waterproofing solution and lime. The sand tends to be more course that traditional bricklaying sand. There is usually a rough scratch course applied underneath, to give grip, and then a layer of carefully finished render applied (final coat), which can be painted to the owners desired taste. Sometimes there may be a need to apply several layers over the scratch course before the final finished layer is applied. The final layer may be very plain, or have designs incorporated. The final finish may be pebble dashed (popular in 60s, 70, 80s) and it can also be dyed with a permanent colour in order to reduce the need for future painting. Render may also be referred to as "The Plastering".

Render is the covering of external walls, as plaster is the covering of internal walls. So render is part of the plaster family.

Sand and cement render then five mil pink finish plaster on that and then seal and paint it once dried out.

A render is a external wall covering that goes over blockwork and brickwork. There are many types of render there's a traditional render that is a sand and cement mix which can be smooth or rough finish which you could also had small shingle or pebbles to. There are high load paint products on the market and theres a product called monacouche render that you mix from a bag.

Render is a mix of sand and cement mixed with water and a water proofer additive. Which is then applied on to the masonry background to form a finished face which can then be painted.

render/cement render a coating of sand and cement mixed to the correct ratio for scratch coats and finishing coats smooth or textured it gets coated on top of bricks blocks or stone,hope that may be some help to you.

After the render has gone off ( set ) it’s best to seal it first with a p v a mix with water , then coat the render with a suitable exterior paint like sandtex