Ready to hire?
Post your job in minutes, browse real reviews and choose who to speak to.Post a jobNeed some tips or advice?
Ask a questionWindows & Door fitting
French door leaking
Anonymous user 03/03/2024 - 3.27 PM
Just moved into a house last week, yesterday during the bad weather water was dripping / pouring through above the french doors into the lounge. Update! After removing the trim from window cill above the water is coming from under window frame and dripping down to room below.
Are you a tradesperson and able to answer this question?
5 Answers
Alpha13 ltd
Rating: 5 out of 5
Without a proper photograph cannot advise.
Answered12 February 2020
5
Anonymous user
It's very hard to say if the window above the door is letting water in then it should enter the cavaty if it's got one if it has a cavaty there should be a cavaty tray on top of the French door lintel which should dispurse any water to the side
If the French doors are opening into a conservatory the conservatory roof must have cavaty trays fitted I would say that it's more likely that the doors are not fitted correctly and fitted to far forward of the virtual d.p.c.there must be a minimum 25mm from external wall face and door frame hope I've been of some help
Answered12 February 2020
3
Josh hall plasterer and decorater
No reviews yet
On what you have said it does sound like the silicone has split you will be able to see if it has if that is the case just cut it all out and re-apply providing a picture certainly would make it easyier to diagnose any other issues in the future
Answered12 February 2020
2
Anonymous user
There are a few issues that could be the causes.The doors may need adjusted in height the clearances may have moved resulting in a gap. An image would help, so would a live video to correctly assess the situation. Without a proper site survey these are hard to diagnose. Also what I have found in the past open mortar beds between the brick or stone let in rain to.
Answered13 February 2020
1
ID Windows Doors Glazing
Rating: 5 out of 5
With the doors closed and locked correctly check to see if there are and gaps at the top of the door
If so then it is probably the cams on the door that would need adjusting if it is a fairly new door also on the locking side there are the jerks that may need adjusting
If there are no gaps on the door then look at the sides of the door check for gaps and even check to see if the frame and doors are plumb
If they are not plumb then it could be a case of undoing the screws and fixing back in plumb
If it’s an old door then would not be able to do any great fine adjustments
Without looking at the door it is hard to advise fully
Hope this helps
Trevor
ID Windows Doors Glazing
Creating a new ID for your property
Answered13 February 2020
1