Eclisse pocket door

very easy to install and good quality product. comes as a kit you make up and fit into stud wall. Be sure to get the fire rated version if fire door is required.

easy to install these kits come with very good instructions. The surrounding area is where problems may occur the floor must be level the correct thickness plasterboard must be used and the screws must be min length for the job or they can impede the door movement. make sure your plasterer finishes dead flush with the steel frame or you will have a problem fitting the trims. electric services need to be on the closing side of the door frame as cables will impede the door movement. BIG TIP; if the floor is not finished, find the finished floor thickness info and make a temporary threshold take all height measurements from that, then you wont have to recut the bottom of the door there is also a guide pin rebate on the bottom of door that would need to be recut hope this is helpful Pete,