Skip to main content

Ready to hire?

Post your job in minutes, browse real reviews and choose who to speak to.Post a job

Need some tips or advice?

Ask a question
Electrical

Buzzing through party wall

Anonymous user 09/03/2024 - 2.52 PM

Hi we need some help to identify a low hum / buzz thought the party wall of our victorian property. We live in a 1-bed first floor conversion, with one flat below and 2 flats adjacent to us. The noise is a low hum which seems to originate in the party wall in the lounge near to the bay window (front of property). The noise carries along the wall through the back room (bedroom) and its feels like the whole property is humming / vibrating. While this noise is not extremely loud, it is persistent and extremely annoying. Generally seems start at around 7:30am each day and is on and off throughout the day, sometimes up until midnight. Often for periods of around 30 minutes at a time, stopping for a couple of minutes, before starting up again. We have spoken to the neighbour in the upstairs adjacent flat, and he does not have any equipment or system running that could cause this noise, but he can hear the same buzz in the wall (we thought it was coming from his side, and he thought it was coming from ours!) Both upstairs flats have the boiler situated at the opposite end to the noise (back of the house) so we don't think it can be this. Both downstairs neighbours say they can not hear the hum, so it appears only o be affecting the upstairs flats. Please help! Is an electrician the best person to assess this and find the source? Or should we be looking for someone else? Any advice would be greatly appreciated.

Are you a tradesperson and able to answer this question?

2 Answers

D & R Property and Plumbing Maintenance

Rating: 4.9 out of 5
New Romney
could be pipework in walls,flats usualy have combi boilers so all work of main,so the hours you describe are when people are using water.
Answered25 September 2017
0

Dorset Electrical Test & Inspection

No reviews yet

Wimborne
1st thing that springs to mind, Dimmer Switch? These can be quite loud, especially if the wrong type of lamp is used, for the dimmer or there is not enough load on the dimmer. This is a particularly common problem in the current market with LED replacing old style lamps and the existing dimmer not being compatible. Just a thought.
Answered27 September 2017
0