Ready to hire?
Post your job in minutes, browse real reviews and choose who to speak to.Post a jobNeed some tips or advice?
Ask a questionPainting & Decorating
Painting moulded doors but keeping wood-grain effect
Anonymous user 15/03/2024 - 2.33 PM
I have just had some internal doors fitted, they are ready to paint. However, I like the wood-grain effect, and don't want to loose that by applying paint. How can I pain the doors whilst keeping the wood-grain effect? Any particular paint recommendations? Would diluting satinwood with water be effective? Thanks in advance. Thanks for the answers ... What would be the consistency of the thinner to paint? Any particular best make thinner you would recommend? Thanks
Are you a tradesperson and able to answer this question?
4 Answers
PBE Interiors
Rating: 5 out of 5
Moulded doors typically come ready to paint. I would use two coats of thinned satin wood straight onto the door with a sinthetic brush which should retain the grain. You could also try using a 'gloss' sponge roller for an even finish - again thinned.
Answered17 November 2016
4
Plastering and Painting Specialist
Rating: 5 out of 5
I dont actually think you need thin any paint. You can paint these and still retain all the grain thats the idea of them being grained . Unless your pouring the paint on to a thickness that will over run the grain -im sure your not :-) then there shouldnt be any problems.
PPS
Answered10 January 2017
3
Anonymous user
1st answer:
I agree with the chap above ^^^
2nd answer:
I'd say 60% paint 40% for either Water based or Oil based. You don't want it running down the door or over your hands. If you get to that point, it's too thin.
• Water based paint thin with water
(Read the back of tin it should say wash brushes with water)
• Oil based paint thin with White Spirits
• (Read the back of tin it should say wash brushes with white spirit or it will say it is flammable)
Lightly sand before you start then "very light" sand between coats with well used and paper.
Answered19 November 2016
1
SPRAY PAINT IRELAND
No reviews yet
If you want to keep the true wood effect grain on your doors I would always recommend a spray finish to avoid unsightly brush marks, but then I'm biased :)
Answered14 February 2023
0