K-rend issues. Looks patchy

Hi jake, with k-rend its better to apply the top coat early in the morning and wait till you can just about get you finger nail in the render then and only then should you scratch off, the only time you should apply the top coat on and leave overnight is when its very cold and then you should get up early and check the hardest of the render, and can you go over the top? yes you can, you stick the beads on with hp12 base coat over the top of the old ones and apply a thin coat of top coat on first to slow the suction down and then apply the top coat on as normal alwalys use a straight edge to take away the worse if you don't and you free hand the render, it will look lovely when the suns not hitting the wall but soon as the sun hits it you will see all the bumps and naughty bits, also you can cut back the bead like a chase and go into the old bead if you cant go over the top of the old bead sometimes you cant go over the top, its the mistake every renderer does when first using this product so don't worry its a easy fix with a low cost hope this helps... Many thanks Ryan

when your texturing always work to a wet edge so do a small area and drop back to rub up . K rend technical department are available, make sure you give them the batch number of your texture.They are very professional in there approach and happy to help. some textures can go over the top other's no so.