I'm looking for a quote to lay a 7m x 5m flat roof.
It will be on top of a wooden structure we are starting to build next week.
We'll lay all of the wooden structure, so all I need is a quote to actually lay the roof.
Any questions, please ask.
We are about to start building a structure at the bottom of the garden, and I'm looking to extend a power supply from the house, to 50 metres down the garden to the structure.
Looking to come out of the fuse board, over the garage and along the fence. I've been told 10mm swa PVC cable will do for...
I have a 1 inch thick granite slab, which is 1850mm long, and 550mm deep.
I need to cut it at 1300mm, and then have 2 holes cut in for waste pipes.
The circle holes dont need to be that crisp as they will be covered by a sinks. The cut at 1300 needs to be very neat.
I'm sure with the right...
Feedback for Stibro Worktops
Peter came and cut a slab of granite perfectly, and polished and bevelled all ends.
First class job.
charliew 30th Aug 14 Positive feedback
I need 3 doors hanging.
2 are replacement doors that are already hung, 1 is a new hang, i.e. no hinge marks etc.
All 3 will need the handles putting into the doors.
I've just opened up a bathroom space, and need the ceiling and doorframe plastered.
Please ask for any additional info
Feedback for Chris Walker Plastering
Chris was hardworking, capable and gave his advice as to the best way to complete the job at hand.
He did a good job or plastering the ceiling in my bathroom, and I will definitely use the guy again in the future.
charliew 9th Jul 14 Positive feedback
I have a Velux window, GGL 3 94cm x 160cm.
I am looking for someone to fit it for me asap. I have all of the flashing already.
The window is to go in a slate roof, which is on the ground floor, so no high ladder work.
I'm based in Hale, Cheshire.
Any questions please ask. Ideally I'd...
Feedback for gtlandscapes
I found Gavin to be a very hard working, honest guy, who went beyond what was actually asked of him, and really did a fantastic job on installing the Velux.
The job was not as straight forward as I first thought, but Gavin worked out a solution,...
charliew 8th Apr 10 Positive feedback
I am looking for a qualified Corgi engineer to help remove an existing boiler and install a new one. The boiler I have been advised to install is a Worcester 42cdi Greenstar Condensing Combination boiler.
There is a fair bit of work to remove the old boiler (I am imagining) and then install the...
Feedback for AGL Heating & Building
Gareth set about the job in a very professional manner, and the work he produced in installing a boiler for me was nothing short of excellent.
This guy knows what he's doing, does it right first time, and I can't thank him enough for the work he has...
charliew 27th Oct 09 Positive feedback
I have approximately 50 sq meters of wooden floor that I need sanding asap.
The floor has been put down, and I have (hopefully) got it ready for sanding.
Looking to start as soon as the right person is available.
Feedback for Joe McGladdery Joiner/Builder
Joe is an absolutely brilliant tradesman.
I really cant recommend him highly enough; he is knowledgeable, hardworking and completely honest.
He helped me sand my floors, and turned a job I would have botched, to a really lovely.
He is worth...
charliew 7th Nov 08 Positive feedback
I've just taken a punt and bought a load of 600 x 600 porcelain tiles that a pal had come up from his house.
He said the old tiler he used, laid them down with the wrong adhesive, so they came up after 4 months.
Question I have is this.
1. Can I use the tiles with the adhesive still on the tile? All the tiles seem to have a uniform covering of 1mm - 2mm of the stuff on the back, and it seems very well bonded.
2. If I do need to remove the adhesive, whats the best way to do so?
Thanks in advance