I would like a quote for 2 double glazed windows, A-grade, and a set of french doors, to be fitted. Fitters must be tidy (use dust sheets) and finish the work to a high standard. Measurements will follow shortly. Thank you.
Feedback for Bennbrook Windows
I am very pleased with the service Bennbrook Windows provided. Chris gave us a competitive price to fit two windows and a door, including some brickwork. Any questions or concerns I had were promptly answered and most importantly, the fitters did a...
bc2778 25th Jun 12 Positive feedback
I need to buy 7 double glazed windows and get them fitted. Near Wood Street, Walthamstow. Currently looking for quotes.
Can you help?
Feedback for Elegance Glazing Ltd
Bilal seems like a genuine and honest person. He explained the process of fitting the window and helped us choose the windows he felt was best suited for the room. He provided good customer service and the window fitting was satisfactory.
bc2778 1st Nov 11 Positive feedback
So the lining/door frame (or whatever you call it) has been put up and the gap is the following measurement: 2055mm (height) x 1057mm (width). What size custom made French doors do I ask the door company for? What I mean is, do I have to specify a slightly smaller size than the gap for the doors to fit? If so, how much by? Any advice would be great. Thank you. X
Many thanks for the replies...I've amended the info below.
I'm currently getting my walk-in shower installed. I was just wondering, what's the best way to route the pipes from the manual shower valve to the shower head? The shower valve will be on a different wall to the shower head. The valve will not be positioned directly underneath it. Can the pipes go down, under the floor boards? or should they go up and across through the wall?
Which is the best way to avoid air locks and maintain a good pressure? Hope you can help. Thanks.
The timber used as joists are 95mm x 35mm in size. They look the same as the roof trusses. It's a mid terraced house built in 1910. I wouldn't put anything too heavy up there. But still, would it sag? Look forward to your feedback. Thank you. B