Re lay sunken areas of block driveway and re finish and seal / use weed proof finish.

Probably this job is too small for your company. We had an oil tank removed, which left a 3ft X 7ft hole. We had it concreted over but unfortunately they didn't have the right mix , mostly loose sand !! We want to put a small shed on it. Thank you. Kind regards Anne

Paving side of existing driveway over the lawn so that there is more circulation space. The existing fence will have to be moved back by one unit to make this work.

Old drive broken up and new curved block paved drive way laid

Can you repair the private roadway that leads to our small estate in Braintree?

There are 3 potholes that need sealing and filling with asphalt. Traffic access needs to be maintained during the work. Best to avoid busy Fridays. I can send you a photo of the roadway if required.

It's not a big...

Area to front of house roughly 17 square meters in size, not for parking cars, just to walk on, already have bricks, second hand but in good condition! Needs digging out leveling and laying, step to front door required open to design ideas, I can supply sand if needed.

I need to get my driveway fixed or re- designed.

Remove 17ft by 2ft high existing front wall and a curved wall 17ft to zero by1ft high,remove 1ft of soil in the above to ground level.
Build new front wall 1ft high and replace curved wall with edging blocks

Blocked paving driveway, needs cleaning and then sealed.

Driveway area , can accommodate 3 medium sized cars.

Existing drive way to be relaid with brick pavers incorporating a new brick construction bin store

I need a quote for my parking space to do block pavement

Hi,

I represent a letting agency. One of the properties that we manage has an issue with the blockwork driveway. At the property, some of the blocks on the driveway have become loose and part of the drive has sunk a little - probably due to a large vehicle reversing onto the drive.
The blocks...

Remove existing tarmac surface, which is cracking up and raise one drain which has sunk, then resurface with paving.

Turning an area of soil (was turf and border previously) into a granite chipping parking space next to an existing tarmac driveway. Thinking area needs to be hardcore and then an extra layer prior to granite/ basalt clippings. Area will not be used frequently.

Small job - to remove a section of tarmac drive roughly 10 by 16 feet adjacent to house, level it and cover with pea shingle (which we already have),and take away broken up tarmac from site. Need a straight edge cut across 10 feet of tarmac at one end.