Our extension has a sloping roof but a flat ceiling. We need the ceiling raised, two velux windows, insulation and plastering.
Need quotes ASAP

This is to knock down a wall between existing kitchen and dining room and also side wall in dining room to kitchen larder and outhouse to make one large room. Then to prepare new rooms ceiling, walls, coving and skirting, and make ready points for electrical and gas, for new kitchen to be fitted by...

Remove existing gas fire and 'Bains' stone fire surround/TV stand and restore/plaster chimney breast.
New gas fire from local isolating valve (detail to be discussed).
Enlarge arched opening between living / dining rooms (load bearing), increased height and width required (final opening size...

Remove an old window, key in about 8 courses of cavity brickwork/blocks 2 or 3 bricks wide, fit new long narrow timber framed window, steel plate to act as lintel & 3 courses above. If possible plaster the small wall area inside. All materials purchased ready to start.

Looking for someone to cut and finish a 5 foot by 2 foot hole in a lathe and plaster wall to let some light into a dark hallway.

2300mm span internal RSJ needs refitting.
Bit messy and fiddly because it will also require refitting ceiling boards, then cabling.
Plasterwork then redecorating

Thanks!

I have a lounge and dining room separated by a chimney breast and 1 side of the breast solid wall, the other side a walk through entry to each room. I want to remove the wall so the walkthrough is on both sides of the fire place. The wall is loadbearing and I am conscious that this will need...

I want to convert a breeze block shed (2m x 5m) into an office space. The shed has solid walls and foundation, as well as electricity. However, the walls will need to be raised slightly (from c.7ft to 8ft), and a new roof added, in addition to other features to make the building insulated and free...

We need small outdoor building bricked up and knocked into a downstairs toilet
and a shower added.
also a stud wall removed to make a downstairs bedroom bigger. would mean removing and moving two doorways.

I would like a side entrance door in place of an existing window . There is an electrical plug that will need to be moved . The lintel for the door is in site as the window is part of a garage conversion.

Current new build integral garage to be converted to a lounge.
Ceiling and 2 walls to internal structure already insulated and plaster finished.
Requires, 2 outside wall insulating and window to front aspect.
Requires door creating into house, non currently in situ.
Simple floor to ceiling...

We would like window knock through completed in our new bathrooom to give view of garden. Looking at 1200 x 900. It will require lintel installed above.

In a similar scenario downstairs we would like to open up kitchen by knocking down a wall. This will most likely need a steel.

We have a...

Move 3 shop counters forward and build a stud partition wall. Electric sockets will need to be moved as well.

Hi.
We would like a new garage door fitted on the existing garage. We have a 1960's garage with double wooden doors and a flat roof. We would like an up and over metal door. We have been told that the bricks above the door will need to be reinforced and possibly a metal lint across? We would...

There are two steel poles either side of a bay window supporting the structure. They look coroded and possibly need replacing. I need someone to look at this for me.