Fill the gaps in your schedule

You have enough carpentry & joinery work to get by, but there's always room for more. When you’re looking for your next carpentry & joinery job, MyBuilder will be there with leads in New Milton that fit into your schedule.

Tradesman start

Completed carpentry & joinery jobs in New Milton, Hampshire

Fit cat flap in single glazed panel door

Carpentry & Joinery job in New Milton, Hampshire

Pane of glass to be removed and cat flap fitted in glazed door, which will need some plywood or similar to fit into the rest of the aperture. See photo of door.
If I’ve measured the panel right, the opening needed for the cat flap is the width of panel opening but the opening is taller so needs...

Feedback for paul murray

Arrived as arranged and fitted cat flap and planed internal doors. Cleaned up afterwards. Thanks

Supply and fit 3 fire doors

Carpentry & Joinery job in New Milton, Hampshire

repace 3 bedroom doors in student let current sizes: w750 h1940; w755 h1945; w755 h 1980; with 30 minute fire reg doors handles and catches (no closure or seals required)

Feedback for paul murray

Ended up fitting 4 fire doors after second quote. Pleasant guy. All clean and tidy afterwards.

Putting up kitchen cupboards + moving existing ones

Carpentry & Joinery job in New Milton, Hampshire

Hanging 2 kitchen cupboards then moving 2 lower ones. Putting up a wine rack. Trimming worktops and putting up shelves. We also need 2 internal doors hanging.


We are delighted with the work so far and extremely pleased to have found and used R and J Carpenters. I'd highly recommend Raimondas as he is meticulous and tidy.

Installing Dado Rails and rehanging internal door

Carpentry & Joinery job in New Milton, Hampshire

We need dado rails fitted in two rooms. We also need to rehang an internal door.


Raimondas did an excellent job for us! The communication was very good, meaning we knew what to expect and when. He completed the job very quickly and was able to help us sort things out when our old house yielded some challenges to the job. We...

Hanging doors and putting up shelves

Carpentry & Joinery job in New Milton, Hampshire

A large area of wall to be shelved and a lounge door to be fitted/hung with the existing one being removed.

Feedback for Solace Building Solutions

Excellent, I was very happy with my cabinet and the professional way I was dealt with. This led to them doing other work for us which we are very happy with too. Thank you very much,
Paul Thomas

Re fit handrail for staircase to wall

Carpentry & Joinery job in New Milton, Hampshire

Hand rail is coming away from wall as the plaster is pretty old and powdery. Will need a board with bigger fixings on wall then hand rail can be secured to this.

Feedback for ASM carpentry

Completed job in a very timely manner and to a good standard. Will use Alan again.

Hanging of 8 doors

Carpentry & Joinery job in New Milton, Hampshire

We need 8 doors to be fitted, existing doors to be removed and disposed of.

Feedback for Craftworx Carpentry

Excellent stuff from the Craftworx team!
Great communications from Melissa and very professional and clean work from Lee and Joe. Even the singing was decent!
Very happy with the work carried out and will definitely recommend and get the guys in...

Repair 2 x rotten window frames & sills. Hand 2 x doors

Carpentry & Joinery job in New Milton, Hampshire

As part of a refurbishment of industrial unit we require 2 x window frames repaired/replaced as they have not rotten and 2 x doors replaced in a warehouse.

Feedback for K and B Carpentry

Easy to deal with, good job. Recommended

Reversing Door, Minor Flooring and Skirting repair

Carpentry & Joinery job in New Milton, Hampshire

To Reverse an exisiting door
Lay floor to the hall cupboard (approx 2ft x 2ft)
Re-fit approximately 6ftft of Skirting (suppied)
Make good architrove around window and attached a small piece.
Lay a floor board by our new french doors.

Feedback for TB Carpentry & Property Maintenance

Really pleased with Terry' s work, did everything we asked and a few bits more that he found! Lovely guy to boot, happy to recommend him... Will definitely use his skills again once we hit the second wave of work to be done!

Alterations to kitchen units

Carpentry & Joinery job in New Milton, Hampshire

Want to remove a built-in fridge in our kitchen to make space for a larger, free standing fridge / freezer - but to make the space big enough we need to re-jig the existing kitchen floor and wall units by 1. removing a thin floor unit, 2. moving 2 existing floor units c. 20cm to left and cutting...

Feedback for M.O.Crafts LTD

Very happy. Did a great job - neat, tidy and end result looks really good. Would happily work with Martin again.

4 x Fire doors need to be fitted with intumescent strip

Carpentry & Joinery job in New Milton, Hampshire

Existing fire doors need intumescent strip to be fitted to comply with council HMO requirements

Feedback for paul murray

Paul did the job professionally and quickly, left the house clean and tidy and charged exactly as he'd quoted. He was also friendly and polite, I would definitely use his services again and recommend him to anyone.

Garden shed

Carpentry & Joinery job in New Milton, Hampshire

I need a garden shed made with feather edged Douglas fern. It needs to have a 45% apex and measure 3m x 2m. I would really like to get moving with this project. Thank you. The area for the shed is clear and flat.

Feedback for Dp carpentry & developments

Totally delighted with the work they have done. They turned up on time, did the job beautifully, cleared up after themselves and were very professional. I cannot recommend them highly enough. I will definitely be using them again. I love my...

External wooden stairs repair/rebuild

Carpentry & Joinery job in New Milton, Hampshire

Stairs from garden to first floor wooden balcony requires repair or rebuild

Feedback for K and B Carpentry

Karl is an extremely polite and helpful individual. He completed the job very professionally exactly as he specified and at the quoted price. His standards are high and nothing was too much trouble insofar as the job evolved during completion.

Fit latches and hang 5 doors

Carpentry & Joinery job in New Milton, Hampshire

Stripped wooden doors. Need to cut out and fit latches and handles plus the bit in the frame (? rebates) and rehang. 4 are currently off frames, 1 is on.

* Added 28th May, 2018 :
Original doors have just been removed to strip and wax. Should be no problems refitting.

Feedback for Bespoke Carpentry

Geoff completed the job well and I was very happy to have him working in my home. Nice chap. I hope he will do more work for me in future.


Carpentry & Joinery job in New Milton, Hampshire

Build a simple wardrobe with hanger and a couple of shelves in gap between fireplace and wall (129 cms wide by 250 cm height). Soft close hinges.

Feedback for Wright Carpentry

Joe did an excellent job for me. He built a magnificent wardrobe and a bike shed for me. He sent me computer screen shots of what it would look like and hand created matching fascias. Very happy with his work and at a great price.

I have no...

How trades win work with MyBuilder

Pick and choose from jobs in your local area

We’ll only send you leads in your area. You choose which leads you’re interested in.

Homeowners shortlist from interested trades

Homeowners make their choice based on the profiles and feedback of interested tradesmen.

Contact details are exchanged

Once you’re shortlisted, we’ll charge a small fee and put you in touch with the homeowner.

Tradesman start