Inspection hatch in boxed in area housing boiler flue - Joinery & Cabinet Making job in Kilburn, North London

Job description

In my rented flat I have a boxed in flue from the boiler to the external wall. The boxed in section is about 2 meters long and about 20cm high and wide. In order to meet new guidelines I wanted to have this boxed in section adjusted so that it can be easily acessed by a gas engineer if they need to inspect the flue. Currently the front panel is screwed in to the box and a few of the screws are covered. I'm looking for someone to make this 2m front panel a hinged front panel so than an engineer can simply lift the panel to access the flue (instead of having to unscrew it all). The boiler and flue themselves are only about 3 years old and these do not need touching at all - this should be a simple carpentry job. I would like the front panel to be flush, to be attached with a hook or lever to prvent any draft coming in from the external vent, and make good / touch up any damage which may be requried. Job is in Queen's Park / Kilburn (NW6) and needs to be completed this year.

I can send pictures if needed or can easily arrange a viewing to estimate if required.



Feedback for doc carpentry services

good comms, arrived on time for the quote and the job, did a professional job, tenants very happy. Highly recommended