Tiling jobs in Cambridge, Cambridgeshire

Job Description

The tiles in my bathroom need replacing and I would like to extend the area of wall that is tiled. These are all splashback tiles.

There are 3 sections of wall -

1. 213cm by 69cm.
2. Sloping roof, max height 210cm, min height 180cm, length 90cm.
3. Sloping roof again, max height 127cm, min height 85cm, length 79cm.

There is also a window between 2 and 3 that I would like to tile around.

The condition of the walls is generally ok although there has been some past mould and there may be some water damage behind the tiles.

Job Description

We will supply tiles, grout & sealer.
Area approx 3-4mSQ. Standard job - nothing fancy- one colour tiles.

Job Description

Remove shower cubicle tiles. Tile shower, wall, floor and 2 sq. m. of wall. Total tiling area approx 10 sq. m. Quote to include materials but not tiles.

Job Description

Area above bath, around shower and behind basin to be tiled. Small area of existing tiles to be removed first. Tiles supplied by us, but not adhesive etc.

Looking for ASAP start as putting house on market.

Job based in Swavesey.

Job Description

Laying new 8mm ceramic tiles (330*330) on concrete kitchen floor which has previously been tiled. Old tiles have been removed. All kitchen fittings and furniture removed. Tiling wall to wall. Area is 20 sq m. Already have selected tiles. Can provide adhesive and grout.

Job Description

We are looking for a tiler to tile our bathroom floor. The room dimensions are 1.9m X 2.8M - We would love to start asap

Job Description

The wall along the length of the bath is 149cm by 156cm, or 2.3244 square
metres in terms of area, so about 233 10x10 cm tiles, or 104 15x15 cm ones.

(The length of the bath is 149cm. There are a few rows of tiles - about 30cm
high - already in place around the bath. From the top of those tiles to the
ceiling is about 156cm. From the top of the bath itself to the ceiling is
186cm.)

The 2 walls along the breadth of the bath are 67cm by 156cm each, or 1.0452
square metres, about 105 10x10 cm tiles or 47 15x15 cm ones.

So the total area that needs to be tiled is about 2.3244 + 2 x 1.0452 = 4.4148
square metres.

Job Description

I would like a quote (and a starting date asap) for the following tasks:

- complete the tiling in honed slate of a bathroom. There are approximately two square meters to complete here. And there will be grouting, sealing the slates and sealing around the bath after this to be done.

- grout appr. 6 square meters of floor tiles (in three little rooms).

- cutting of porcelain tiles to create a 'skirting' in the downstairs WC (under 5 linear meters).

- complete tiling of a 6 square meters WC in 30x30 cm porcelain tiles (business unit)

Materials provided.

Job Description

fitting tiles to bathroom floor.

Job Description

Hi,

we are currently installing a new kitchen and would like a quote for tiling approximately 2.5m2 of wall and the window sill. The wall will be plastered and ready for tiling. We have already bought the tiles but not the grouting so please quote for both labour and grouting.
We live in Cambridge CB1 3QL and would very much appreciate if the work could be done either next week or the week after if possible.

Please let me know if you are interested and how much it would cost.

Regards

Tana

Job Description

Remove old bathroom tiles, make good walls and prime walls with bonding agent.

Supply tiles (approx. 8M2 of 200 X 250) and retile bathroom.

Supply and fit a new MDF bath panel.

Supply and fit floor tiles (currently floor has lino on wooden boards).

Tidy up area under sink with MDF boxing.

Job Description

I require a bathroom to be completely tiled. The approximate wall area is 15.6m2. I (should) have purchased enough 20x25cm white tiles as well as enough 20x10cm blue tiles to create a horizonal stripe across the bathroom. I also (should) have purchased enough tile adhesive and tile spacers to complete the job. However tile grout (preferably ultra mould-resistant) and corner trims will need to be provided.

For a detailed specification of the job (please ignore the bath, sink and toilet installation stuff), please see: http://www.peztech.net/Feb2012Specs.pdf

Please contact me if you have any questions or would like to be able to view the bathroom.

Job Description

Lay 10 tiles (30cm X 30cm) on concrete.

Job Description

Job details:

Floor preparation - concrete floor in kitchen and hallway needs to be leveled with self leveling compound

Put ceramic tiles the total area approx. 19m2 (both kitchen and hallway)

Would prefer if you could provide required materials (except tiles, already prepared)

Would like the work to start hopefully end of next week , or week after ( will depend when the plumbers finish work on the kitchen rads, and pipes)

Job Description

Tiling complete bathroom (floor to ceiling) - approx 17sq m of tiling (no tiles at present). Some awkward angles and difficult to reach bits.
Painting ceiling (?needs lining paper first). Painting door and skirting boards. We have the tiles. We don't have cement, paint etc.