Stonemasonry jobs in Manchester, Lancashire

Job Description

We are having a new set of gates fitted to our driveway and require two exising stone pillars (approx 500mm sqare) raised by another 500-600mm. We have plenty of stone from the original house build circa 1910 to the rear of the house. We will require the pillars to be filled with suitable concrete to take the gate hignges and the capping stones replaced.

Job Description

Stone wall has been knocked over by a tree and it needs rebuilding. It is approx 6/7ft high.

Job Description

Having new PVC sliding doors fitted however the old ones that need to be removed did not have a lintel supporting the brickwork above

Before the new doors can be fitted a load bearing lintel needs to be installed.

Job Description

Hello,

A big piece of our gate post have 'fallen out', there is also a crack all way around so the top is loose.

Ideally we would like to repair it rather than replace it with bricks but it is dependent on the cost of repairing it....

Many thanks
jon

Job Description

Sandstone gatepost to Victorian terrace has a crack which requires repair before winter; this gate post and another also require clean.

Job Description

Remove flaking stonework from around the front entrance door and take back to sound stone.

Smooth of the stone surface with a sander.

Finish with clear silicone to seal the stonework.

1-2 hours job.

Job Description

BUILD FIRE SURROUND/ AROUND WOOD BURNING STOVE

Job Description

lintel for across fire in stone /granite

Job Description

York stone of various shapes and sizes to be laid to rear yard.

* The following information was added Saturday, 5th September, 2009 :
Approx. 20sq.metres. Flags on site, mot in situ.