Security Systems jobs in Thamesmead, South London

Job Description

We have a CCTV system already purchased (from Maplins). We now need the cameras mounting on the exterior walls for the maximum coverage. We have two properties at either end of a street, in the first instance, the plan is to split the cameras that we have across the 2 properties with an eye to add more later if required.

We need help to mount the cameras in the optimum positions on the front of the two units and secure the wiring on the outside and inside of the properties.

This is a fit only job, as we have the camera kit already, though additional cabling may be required.

Job Description

Fit a Yale lock to front door of a flat, which opens out onto a communal hall and only has a mortice lock. Would require the door frame to be cut out to accommodate fitting.

Job Description

1 Front door lock needs to be adjusted (5 lever mortise deadlock) - There is already a lock in place, however it does not lock very smoothly and there is a hole on the internal side of the door which needs to be covered.
2 internal doors need locks installed
Quote to cover labour & materials

Job Description

ESP Infinite Prime Alarm System control panel with SIM card
5 wireless sensors
No outside siren required

The situation is that the system was working fine, but panel was faulty so I had the panel replaced. The system just needs to be reconfigured and re-activated with the sensors.

Please let me know how long the job will take and cost? Can this be done over the weekend?

Job Description

To provide and fit a reasonably good intruder alarm system for a double fronted house

Job Description

We live in a Victorian house that was refurbished two years ago and it has exposed wiring. The most immediate job needed is help with stopping the fire alarm beeping. Our smoke alarm is an AICO EI141 and we have replaced the batteries and turned off and on the mains, but it is relentlessly beeping every 25 seconds.

The other job that would ideally be combined with the work on the fire alarm, are several lights in the house that do not work. One is a light on the top floor in the bedroom, the second an inset halogen light in the kitchen, and the third is a light in the office.

Job Description

I have a tenant that's moved out, left the system unarmed, but not left me the User Code. I need the system reset.

Job Description

We are looking for an electrician to remove our current ADT alarm system in preparation for a new alarm system we are self installing that we have recently purchased. It has been unmonitored by ADT since 2005 so there are no contract issues in its removal.

The system has room sensors as well as a window sensor for one of the bedrooms.

We are eager for the alarm system to be removed as soon as possible and shall be at our property on evenings and weekends for the work to be carried out.

Job Description

Basic but quality alarm needed to be fitted in the next couple of weeks. Dont have a reliable power source yet as its being rewired in the next couple of weeks.

Job Description

To offer alternative for current alarm and lighting system, plus locksmith to change locks back door and front.

Job Description

supply and fit locks to dorrs and windows to fit insurance spec

Job Description

Outside security lights for ground floor flat - supply and fitting as soon as possible!

Job Description

We have a Rascal + alarm system fitted. The system is currently out of order. When there is a power cut the alarm goes off. Bascially want the system deactivated so that it can be removed and upgraded at a later stage.

Job Description

Test and certification of 1 bedroom flat to be rented out. Any issues to be sorted too.
One known is Immersion heater timer needs to be moved and secured to wall.

Viewing for estimates available after 6pm or weekends. Work can be carried out weekdays with 3-4 working days notice (fulltime job) or as per previous.

Job Description

Small semi requires the installation of a mains powered smoke and carbon monoxide alarm.