Plumbing jobs in Burton On Trent, Staffordshire

Job Description

Had to turnoff on pipe the small tank (radiator heating tank?) as water pouring out overflow outside could've ballcock? Yesterday filled tank to bleed radiators and turned back off as was waiting for a friend who is a plumber. Today noticed that tank spilling over and wet loft was told relatively easy cheap job but need it doing as ap as friend busy andreadyour good feedback. Looking forward to your reply. Thanks. Jess.

Job Description

The hot water is feeding to the shower but not coming out through the shower head. I have researched this and think it may be that a valve needs replacing. Also, the toilet cistern does not flush well (have to pump it 5 times). Please quote and let me know if you have availability next week.

Job Description

New installation in new house. Fit a thermostatic shower over bath (non electric)

Job Description

Leaking standpipe outside by a fish pond.It is not a tap washer problem and It would appear the leak is coming from joint in the pipe just below the ground surface.

Job Description

Glow-worm boiler going out with "F1" failure message.

Job Description

Supply and installation of unvented hot water cylinder. Currently have pump to provide pressure for showers but pump is failing

Job Description

I'd like someone to install a Mira Sport Max shower - I already have an existing Mira Sport shower (10.5kw) but this is a newer model. I will supply the shower so Im just looking for labour to remove the old unit and install the new one.
I'm flexible on when it can be installed

Job Description

minor leak under kitchen sink & loose kitchen tap
dishwasher not working - trips electricity
minor drips from a couple of radiators
bathroom extractor fans (2) not working correctly/noisy
minor leak under bathroom sink
bathroom sink push plugs not working correctly

Job Description

Changing the layout of our bathroom so need the following work done.

Mainly first fix

Toilet -
Hole cutting through wall then connect to soil pipe.
Water supply pipe moving about 18 inches

Bath,
Copper supply pipe moving 18inches.
Bath waste, hole cutting in wall then run condensate pipe into this pipe.

Basin, additional pipes adding to existing pipework for hot and cold supply.
Hole cut through wall for waste pipe.

Then when flooring has been replaced need price for second fix, connecting bath, basin, shower etc.

Tradesman must be qualified, and we need need a written guarantee.

Need work completing in next two weeks

* Added 11th December, 2010 :
External picture shows existing waste, the one shown on the bottom left, this needs extending by 700mm to the left and redoing in 40mm, this will then take the condensate and the new basin waste.

The soil pipe shown will need extending by 900.

Other pics show position of new basin (where the drill is standing) you will have to drill through a joist to get the feeds for the basing onto the pipes shown in the picture. The plastic elbows can be replaced with a plastic equal tee.

The other pic shows what will be the bath supply pipes, these will need cutting and routing through the joist and then extending by 600mm.

* Added 11th December, 2010 :
Also small copper pipe shown on wall will need fitting over the new waste, would also like a removable bung on end of waste (new basin side) so we can unblock pipe if any problems.

Job Description

a tap is turned off under the sink, this was necessary because a hose was left running after a washing machine was plumbed in. I assume this needs sealing before the tap can be turned back on.

Job Description

Remeha Avanta Plus domestic boiler has a small water leak

Job Description

I live in a 3 story town house and have problems with 2 out of my 3 toilets. (the ground floor has no issues!). Recently, when the toilets are flushed, they make a very loud racket until the water stops running into the tank. There is also an issue with the water pressure and the water can either trickle or gush out.

I need the work doing a.s.a.p (preferably before the weekend)

Job Description

Hi, I need a plumber to work on a day rate in essentially a large new-build house in Lichfield. You should be able to set up central heating systems to the satisfaction of building control and either gas safe registered or able to get a mate / colleague to come out to verify the work and to provide necessary certificates. There's a fair bit of work needs doing. Ideally you'll let me know about you, how soon you're available, your rate per day and how long a working day is. Thanks. Rob

* Added 20th May, 2011 :
By the way the entire property's been gutted, most of it is completely new, and none of it is plasterboarded so it should be a relatively easy job with minimal (if any) crawling around in confined spaces. I also have tools on-site, ladders, steps, 2 mobile platforms etc. so all in all a nice job I should think.

Really most of the work for now will be first fix, with the 2nd fix coming in a few weeks.

Job Description

Radiator temperature knob stuck, cannot turn radiator on. The plastic top is no longer attached, and may need replaced.
Would like someone to fix it as soon as possible.

Job Description

I would like a quote for the following work to be completed asap.

1) To replace an existing radiator with a towel rail / radiator. This will involve modyfing the heating pipes and fitting the radiator and valves.

The new towel rail has the same centres for the inlet and outlet as the old radiator, however the central heating pipes will need extending approx 1 inch to acomodate the extra depth of the towl rail.

2)Replace 5 of the existing radiator valves with TRV valves and lockshields .

3) Refill the heating system and add anti corrosion additive.

I will purchase the towel rail and TRV and lockshields and aditive. Tradesman to supply any odd bits of pipe.

The sytem is a 10mm microbore system gravity fed. Approx 12 years old.

Only qualified plumbers to quote.

* The following information was added Sunday, 7th December, 2008 :
Have decided we need 7 TRVs fitted, including the one fitted in the bathroom.

I am happy to remove the radiators (leaving the valves in place)if this helps to cut the cost.