Plumbing jobs in Bristol, Avon

Replacing a radiator

  • Location: Bristol
  • Hired: Joe Pring Plumbing & Heating
  • Trade: Plumbing
Job Description

We are looking to get a radiator removed and replaced with a vertical one within the same area in our bedroom. The bedroom is located a floor above where the boiler is. We would need help sourcing the correct radiator for the size of the room. We have exposed wooden floor boards.

Quote to replace Actuator

  • Location: Bristol
  • Hired: AM heating
  • Trade: Plumbing
Job Description

Hi
I have a Drayton MA1 Actuator, that appears to have gone pop.
(When the hot water is on and the CH is off, the radiators still come on)
So I am looking for quotes on the replacement of this part.
Many thanks,
Pete

* Added 8th May, 2013 :
I'm at work mon-fri and unable to take calls directly, I can reply to emails almost immediately or will try to return calls in the evening.

* Added 8th May, 2013 :
Drayton Mid Position Actuator.

Looks like this.

http://uk.ebid.net/for-sale/drayton-ma1-mid-position-actuator-with-plug-90953034.htm

Plumb in belfast sink

  • Location: Bristol
  • Hired: Advance Installations
  • Trade: Plumbing
Job Description

Job will involve:
Disconnecting and removing existing sink which is a standard sink built into worktop. This sink will also need to be disposed of.
Supplying and installing suitable taps into the new pine sink unit. The unit does not come with taps; I am happy to select these either from a supplier that you use or can show you what we're after online but these will ideally be traditional looking chrome mixer tap.
The taps will then need to be connected up; the sink will be in the same place as the old sink.
Owner/occupier so will be around the home.

Replace toilet syphon/diaphragm

  • Location: Bristol
  • Hired: JPK Plumbing
  • Trade: Plumbing
Job Description

Close-coupled toilet flushes intermittently; sometimes needs the handle to be pumped, sometimes flushes on first go. A plumber came out and did something with the diaphragm last weekend, but didn't really fix the problem. Think the syphon needs replacing.

Waste disposal system removed

  • Location: Bristol
  • Hired: Cleverley Builders
  • Trade: Plumbing
Job Description

My waste disposal system beneath the sink is broken, I would like it removed and the plumbing changed so that I am left with a normal sink and draining sink.
There are no electrics involved.
I don't have the parts needed.
I don't know if the hole that would be left when the disposal system is removed can be changed back to a normal sink again.

replacement stop cock

  • Location: Bristol
  • Hired: Port Marine Bathrooms & Kitchens Ltd
  • Trade: Plumbing
Job Description

Hi, the main stop cock in my house is leaking a bit and I need it replacing.

Install 5 No. new rads & alter pipework on a 6th rad

  • Location: Bristol
  • Hired: CD PLUMBING HEATING AND GAS
  • Trade: Plumbing
Job Description

5 No. new rads to be installed (already purchased). Existing rads have already been removed & floorboards will be lifted prior to start. New double rads are narrower than previous so pipework requires alteration. Chrome pipework required above floorboard height. A 6th rad requires repalcement of copper pipe with chrome.
Chrome pipe, TRVs & lockshields already purchased. Once complete, CH system to be primed & filled with inhibitor etc.

Rattling noise coming from boiler

  • Location: Bristol
  • Hired: AM heating
  • Trade: Plumbing
Job Description

I currently rent a property in knowle in Bristol. The tenant has informed me that the boiler keeps making rattling noises when it is switched on. I am sure this is just a a simple thing but I was wondering if you were available to have a look to see what the problem is.

Thanks for the help

Kind regards

Julie Grant

Lead Pipe Replacement

  • Location: Bristol
  • Hired: kelly plumbing Heating & gas
  • Trade: Plumbing
Job Description

We have a damaged pipe that is causing lead fragments to get into our water supply. It seems to be our service pipe. I can see from your history that this is something you've done before. The service pipe is in an alcove which our fridge stands in and should be fairly easy to access. We have had advice from the water company about how the new plastic pipe could be fitted but are after a professional to install it. Hope you can help.

Trace and access a leak under flooring and repair leak

  • Location: Bristol
  • Hired: Port Marine Bathrooms & Kitchens Ltd
  • Trade: Plumbing
Job Description

We have a leak from our hallway into our basement living room. Think it is coming from pipes leading to radiator, but unsure as the leak is coming from under floorboards which are held down either end by skirting and stairs and we haven't been able to lift them to look. Would like to find out where leak is originating and repair - will involve lifting floorboards. We have contacted our house insurance, but are unsure about the work that they want to arrange - we feel it might be better to get someone ourselves, so would welcome an honest quote about what work needs doing and how much it might cost.

Movement of pipes on internal kitchen wall

  • Location: Bristol
  • Hired: kelly plumbing Heating & gas
  • Trade: Plumbing
Job Description

Hi,

We currently have three pipes (cold water, hot water and gas) that run along the internal wall in our kitchen between 5 and 10 inches from the floor.

We would like all three moved within 6 inches of the floor so that they run underneath our new kitchen floor units.

The important thing is that the work must be completed on Monday 25th March to fit in with our kitchen fitting schedule. On this day the kitchen will be empty of units and the plumber will have free access to the internal wall.

Is this a piece of work you could quote us on please?

Thanks,

Craig

Feed tap into washing machine replacement

  • Location: Bristol
  • Hired: Port Marine Bathrooms & Kitchens Ltd
  • Trade: Plumbing
Job Description

Washing machine engineer says current tap is blocked. Need T-bend put in and new copper pipe installed. And new tap, closer to machine. Also, waste pipe extension needs fitting properly.

Leaking radiator

  • Location: Bristol
  • Hired: Joe Pring Plumbing & Heating
  • Trade: Plumbing
Job Description

We have a towl radiator in the bathroom which won't stop leaking, even after the radiator is switched off. We would like this to be fixed.

Thanks.

Stop tap replacement

  • Location: Bristol
  • Hired: kelly plumbing Heating & gas
  • Trade: Plumbing
Job Description

Replace main stop tap located in front path (lead pipe feed to house).

Remove some pipes

  • Location: Bristol
  • Hired: JPK Plumbing
  • Trade: Plumbing
Job Description

We have just removed a radiator from our bedroom chimney breast. We have 2 pipes sticking out through the floorboards. We would like these pipes cut back and capped under our floor boards so we can re-install a victorian fireplace and hearth. We also have some raditors not working and would like a general evaluation of our boiler and plumbing system.

MyBuilder for Tradesmen

Sign up
Register as a Tradesman
Express interest in jobs
Choose the jobs you want
Get Shortlisted
Job posters will add you to their shortlist
Win Work, Get Feedback
Positive feedback gets you more work
"I would like to say I have had my busiest year ever since trading thanks to your site. You have put together a great site that works!"
Tim Cooper
Locations
>Bristol
>Bath
>Clevedon
>Caldicot
>Badminton
>Winscombe
>Wotton Under Edge
>Radstock
>Cheddar
>Chepstow
>Bradford On Avon
Read about MyBuilder in the Press