Plumbing jobs in Badminton, Avon

Job Description

Last September I moved into my small detached house which was built in 1980.

The boiler was recently replaced with a Worcester/Bosch and I would be very grateful if you could arrange a visit to provide advice and a quotation to move and improve the radiators as summarised below:

1. Replace & reposition the lounge radiator with a new radiator I have already.
2. Replace the dining room radiator with the radiator removed from the lounge.
3. Advise about replacement of the radiators in bedrooms 1 & 2

Job Description

The pipe that is attached to the drain in our shower is leaking badly. This is damaging the ceiling below. This would be an urgent job due to the need to use the shadower again.

Job Description

Please supply and fit external hot and cold taps.

Job Description

Loft conversion, about 15m square floor space in an L-Shape with a low 2metres high ceiling.
Currently have a double radiator (600mm x 600mm) installed, but would like to reduce this to a single panel to create some more space and not protrude into the room as much to be less hazardous (to be a childs bedroom).

Quote please for removing existing radiator and disposal, then installing a new one (depending on price, buying this too). Depending on the size needed, we would ideally like one 600mm x 1000mm as this would fit the wall nicely! But this will entail moving one pipe along the wall.

Job Description

Current seal (using sealant and plastic strip) isn't working very well. This bath has been re-sealed several times, now I would like a 'professional' in to do the job once and for all as I'm having work done in the room below (kitchen) shortly and need the reassurance that the bath seal will not fail and cause water to leak through the floor in the bathroom and down through the kitchen ceiling (as it has done in the past).

Job Description

Have just moved into a new property and require a washing machine plumbing in. The washing machine for this property is currently plumbed into the shed and as a result there is currently no available space for it in the kitchen, nor is there an available plumbing point.We plan to move an integrated fridge and put the washing machine in its place. Please note this is not right next to the sink therefore i guess some extension pipework could be required?

In summary this job quote is for the following:-

1. Disconnect and move integrated fridge
2. Move washing mashine into its place
3. Plumb in washing machine

Ideally would be really great if we could get the work done by the end of this week (by Sunday 11 Nov) or if not ASAP.

Please feel free to ask any questions, otherwise many thanks in advance for your response and quote.

Job Description

Single 40 mm diameter hole to be drilled through outside wall for washing machine waste pipe

Job Description

Flush button not connecting on closed cistern toilet ( cloakroom toilet and basin unit ).

Job Description

When the toilet has completed flushing, water continues to dribble into the toilet bowl. the only way to stop it is to stop the cistern refilling.

Job Description

Install new central heating system to 4 bed house
Install new batroom suite c/w shower over tile etc
New wc suite
new wc and basin suite
New kitchen plumbing
Basically re-plumb whole house

viewing for quotes 31-03-12/01-04-12

Job Description

Two small jobs; the washing machine is in place and the plumbing has been installed up to it. It just needs connecting up.

The toilet has a veyr small problem, the flushing mechanism has come away from the button the cistern lid. I'm sure this is very simple to fix if you know what you are doing!

Job Description

To fit a bathroom sink hot and cold tap, a bath mixer tap with handheld shower and to lay approx 10 ceramic floor tiles ( will need cutting in around toilet and sink pipe) - I have the taps, tiles and cement

Job Description

External soil pipe for en-suite leaks when toilet is flushed.

Job Description

Current system is 2 x installed showers using Newteam 968T Mixer units.

One mixer (bathroom shower) has no thermostat control and will require replacing with bar mixer (or similar) Current hole centres are 140mm, with pipe work fed from airing cupboard located directly behind mixer.

System is low pressure and would like to add pump to feed both units.

Potential further work to replace both bathroom and ensuite in next 6 months.

Scope can be supply and fit or labour and misc parts only.

Would like initial work perfoming asap.

Job Description

Hi, we had a burst pipe early this year which forms part of the outside tap. This needs to be re welded to enable it to work again.