Kitchen Fitting jobs in Bradford, West Yorkshire

Job Description

Require a fitter to measure up for units, order from supplier and install.

Job Description

Removal and replace kitchen including appliances.
Including all elecrical & gas fittings
Remove and resite existing combi boiler
Rehang door on opposite side opening
Tile and finish to high standard.
Units are ready built from Howdens including appliances.
The job will need to be completed within a week and hot water / heating supply will need to be maintained as the house has a tennant & children.

Job Description

I require the fitting of a new kitchen to a one-bed property in Huddersfield (HD3 4). The kitchen itself is pretty small - currently has 7 or 8 units.

I also require the flooring to be completed as well - looking to install laminate throughout.

Currently investigating purchase of above items - if you wish to quote for supply and fit, or fit only please let me know (I'd welcome your advice on supply however). The property is empty and work can commence ASAP - happy to facilitate site visits as appropriate.

Job Description

require kithen fitted its not a very big kitchen

Job Description

2 wall units, 4 base units + sink, bult under oven and gas hob + cooker hood to fit. Tiling to walls

Job Description

I need my new kitchen fitting. I have a plan which was drawn up by Howdens and I have had all the units and fittings delivered, just need someone to fit it in for me. There are three units to fit and worktops to install. Part of the plan is to open up the chimney breast in order to install a range cooker in there. This will require the gas connection extending, addtional plug sockets installing and the current gas cooker removing.

* Added 30th October, 2012 :
Additional info: The worktop is solid wood and will require cutting to size. Also one of the units will need cutting to size to fit the existing belfast sink.
The work to the chimney breast will involve raising and widening the opening, putting a new lintel in higher up and also installing the required electrics and gas lines for a dual fuel range cooker. I would also like some tiling doing as part of this job.

Job Description

Advice and fitting new kitchen units. Some plumbing and tiling also needed

Job Description

We have just got a new fridge and freezer but they don't fit under our worktop (!) and, even if they did, would be too close together. We wondered if it would be possible to raise the work top or else rearrange the kitchen units so that the fridge and freezer can fit in somewhere else

Job Description

I've bought a new, dual fuel oven (electric oven, gas hob) and i need a CORGI registered gas fitter to come out and fit it, please. Should be a quick job, but i obviously need it doing safely, and in the next couple of weeks, please!

Job Description

We require a complete removal, installation and finish of a kitchen in Mirfield.We would like this to be done within the next 6 weeks or so. We have not sourced the kitchen yet, although we have detailed plans. Do you ever use Howdens? The kitchen is medium sized. It requires minimal replumbingor electrics and no floor to be laid.

Job Description

To mitre join 1 L-shaped worktop and cut-out for hob and sink..

Job Description

Registered tradesman required to replace Bosch (13amp plugged) built in oven with approx same-sized new Electrolux (15amp hard-wired) unit. Tradesman to provide (or advise on purchase) the necessary wiring/boxes to replace current 13amp plug connection(currently no separate cooker connections in kitchen).

Job Description

need worktop fitting laminet type

Job Description

I would like to change the laminate worktop, sink and tap in my kitchen. All items are purchesed already.

Job Description

We need to someone to:
*Remove our chimney breast
*Dry line insulate the exterior wall
*Move the boiler into the basement
*Put down a new floor
*Install the new kitchen
*Skim the artexed ceiling