Kitchen Fitting jobs in Newcastle Upon Tyne, Tyne And Wear

Job Description

This is to install a B&Q kitchen into a medium sized kitchen. The kitchen is approx 4m by 3m with wall units on 2 walls and ground level units on 3 walls. There are about 15 units altogether (there are 20 handles being used) with an integrated dishwasher, built under double oven, gas hob too. A free standing condenser tumble dryer and a washing machine also have to fit into this design.

The B&Q kitchen is on order and will come towards the end of Feb. The worktop is Oak Woodmix. The cabinet doors are High Gloss Cream. Two of the units will need cutting to fit into place - one around the boiler and another unit needs some width taking off it.

Don't know if any plastering needs doing until I gut the existing kitchen.

The kitchen will be mostly gutted after my new boiler has been installed so this does not need doing.

Job Description

Required to install new kitchen units. I'm willing to remove existing one and act as a labourer. Fairly simple kitchen lay out nothing complex. Cooker, sink and integrated dish washer to be installed (dish washer is next to the sink and washing machine). This is something I could probably do myself so sensible quotes only please I'm not tight I just know when I'm being ripped off. Start date is negotiable and happy for hours to suit you, worktops are wooden.

Job Description

To fit only. Homebase kitchen cabinets with laminate worktop, cooker and hob installation, and all necessary plumbing, plastering and electrics. Small kitchen consisting of 10-12 units (two wall units). Floor and wall tilling not to be included.

Job Description

Remove cupboards in kitchen and replace with tiles. Tiling between kitchen surface and shelf.
Several joinery jobs also, including measure and replace internal and external doors and replace part of patio fence, though this is less urgent.
Put up shelves.8 in total

Job Description

To assemble and fit 2, 40 x 70 cm ikea cupboards and a recirculation extractor hood in the kitchen.

Job Description

assemble sink unit, cupboards integrated units and fit.

Job Description

I currently have a Candy CFBC3150 fitted fridge freezer unit in my kitchen. It has broken down and I am ordering a like for like replacement. Description of the job is the following:
1. Remove the fitted doors from the old unit
2. Remove the old fitted fridge freezer
2. Install the new fridge freezer (I will order this separately)
3. Set up the fitted doors onto the new fridge freezer

Weight of fridge freezer is 60kg.

If possible it would be great if you could also take the old fridge freezer away. If there would be an additional cost for this, please could you highlight this in the quote.
Thanks,
Nick

Job Description

Small job: fitting a L shape worktop and replacing the new electric hob and new top and sink. And a I shape worktop as well..

Job Description

High gloss cornice and kickboards need fitting to wall and floor cabinets respectively

* Added 1st November, 2012 :
Fit only,

Also 4 sqm of tiling needs to be done (the tiles i have) so this could also be taken in to the quote that would be great, I would need the supply of adhesive, grout and sealer.

Job Description

supply and fit a kitchen

Job Description

Removal of internal structural wall between kitchen and dining room to create kitchen diner. Plumbing and electricals will be required in connection with this

Job Description

I need the following jobs:

1- remove 1 cupboard and plumb in my new freestanding dishwasher
2- remove integrated cooker allowing space for new freestanding cooker
3 - Put in a new back door (this requires removing of old bricks where a door was previously that another owner has bricked up) and then putting in a new door.

all cupboards and units are the stranded 60cm width

Job Description

Laminate flooring to be fitted - area roughly 4mx2m.
New worktops to be fitted - laminate, roughly 7m.
New in-built oven and hob to be fitted.
New kitchen sink to be fitted.
Integrated dishwasher to be fitted - existing units need to be moved to fit this in.
All materials bought.

Job Description

install 2 lengths of oak worktop and join,router out cuts for belfast sink and single tap hole make new oak door for tall unit to match existing units,possibly plumb in belfast sink.

Job Description

Looking for someone to remove old kitchen work top, sink and taps. And replace with new kitchen work top, sink and taps