Kitchen Fitting jobs in Gateshead, Tyne And Wear
Search for completed jobs in your area
Kitchen installation in medium sized kitchen
- Location: Blaydon On Tyne
- Hired: Northeast Building and Property Maintenance
- Trade: Kitchen Fitting
- Positive feedback on 18th Mar 13
Job Description
This is to install a B&Q kitchen into a medium sized kitchen. The kitchen is approx 4m by 3m with wall units on 2 walls and ground level units on 3 walls. There are about 15 units altogether (there are 20 handles being used) with an integrated dishwasher, built under double oven, gas hob too. A free standing condenser tumble dryer and a washing machine also have to fit into this design.
The B&Q kitchen is on order and will come towards the end of Feb. The worktop is Oak Woodmix. The cabinet doors are High Gloss Cream. Two of the units will need cutting to fit into place - one around the boiler and another unit needs some width taking off it.
Don't know if any plastering needs doing until I gut the existing kitchen.
The kitchen will be mostly gutted after my new boiler has been installed so this does not need doing.
to fit new worktops in kitchen
- Location: Sunderland
- Hired: home trades
- Trade: Kitchen Fitting
- Positive feedback on 21st Feb 13
Job Description
to fit new worktops, take out hob and sink from old top and insert into new tops
3.5sqm kitchen fit.
- Location: Newcastle Upon Tyne
- Hired: LT Construction
- Trade: Kitchen Fitting
- Positive feedback on 4th Feb 13
Job Description
To fit only. Homebase kitchen cabinets with laminate worktop, cooker and hob installation, and all necessary plumbing, plastering and electrics. Small kitchen consisting of 10-12 units (two wall units). Floor and wall tilling not to be included.
cupboard and extractor installation
- Location: Newcastle Upon Tyne
- Hired: rob brown joinery
- Trade: Kitchen Fitting
- Positive feedback on 7th Jan 13
Job Description
To assemble and fit 2, 40 x 70 cm ikea cupboards and a recirculation extractor hood in the kitchen.
to assemble and fit ikea kitchen
- Location: Newcastle Upon Tyne
- Hired: Join it Joinery and Property Maintenance
- Trade: Kitchen Fitting
- Positive feedback on 5th Jan 13
Job Description
assemble sink unit, cupboards integrated units and fit.
Installing a fitted fridge/freezer
- Location: Newcastle Upon Tyne
- Hired: LT Construction
- Trade: Kitchen Fitting
- Positive feedback on 22nd Dec 12
Job Description
I currently have a Candy CFBC3150 fitted fridge freezer unit in my kitchen. It has broken down and I am ordering a like for like replacement. Description of the job is the following:
1. Remove the fitted doors from the old unit
2. Remove the old fitted fridge freezer
2. Install the new fridge freezer (I will order this separately)
3. Set up the fitted doors onto the new fridge freezer
Weight of fridge freezer is 60kg.
If possible it would be great if you could also take the old fridge freezer away. If there would be an additional cost for this, please could you highlight this in the quote.
Thanks,
Nick
To fit worktops
- Location: Newcastle Upon Tyne
- Hired: J. REED (NE) LTD
- Trade: Kitchen Fitting
- Positive feedback on 12th Dec 12
Job Description
Small job: fitting a L shape worktop and replacing the new electric hob and new top and sink. And a I shape worktop as well..
Kitchen re vamp
- Location: Chester Le Street
- Hired: ISworx
- Trade: Kitchen Fitting
- Positive feedback on 1st Dec 12
Job Description
I want to update my kitchen and would like to keep the existing kitchen carcasses but require new cupboard doors, worktops, sink,laminate flooring, lights, new electrical points, cooker, hob, extractor fan and a new radiator. I have already purchased the kitchen cupboard doors and know where i intend to buy all the other items.
Wall Cabinet Cornicing and Floor Cabinate Kickboards
- Location: Newcastle Upon Tyne
- Hired: J. REED (NE) LTD
- Trade: Kitchen Fitting
- Positive feedback on 20th Nov 12
Job Description
High gloss cornice and kickboards need fitting to wall and floor cabinets respectively
* Added 1st November, 2012 :
Fit only,
Also 4 sqm of tiling needs to be done (the tiles i have) so this could also be taken in to the quote that would be great, I would need the supply of adhesive, grout and sealer.
kitchen fitter
- Location: Newcastle Upon Tyne
- Hired: LT Construction
- Trade: Kitchen Fitting
- Positive feedback on 15th Oct 12
Job Description
supply and fit a kitchen
Removal of internal structural wall
- Location: Newcastle Upon Tyne
- Hired: rob brown joinery
- Trade: Kitchen Fitting
- Positive feedback on 8th Oct 12
Job Description
Removal of internal structural wall between kitchen and dining room to create kitchen diner. Plumbing and electricals will be required in connection with this
I need a few jobs in the kitchen completed
- Location: Wallsend
- Hired: home trades
- Trade: Kitchen Fitting
- Positive feedback on 8th Sep 12
Job Description
I need the following jobs:
1- remove 1 cupboard and plumb in my new freestanding dishwasher
2- remove integrated cooker allowing space for new freestanding cooker
3 - Put in a new back door (this requires removing of old bricks where a door was previously that another owner has bricked up) and then putting in a new door.
all cupboards and units are the stranded 60cm width
Kitchen re-model
- Location: Newcastle Upon Tyne
- Hired: SJ Installations
- Trade: Kitchen Fitting
- Positive feedback on 19th Jul 12
Job Description
Laminate flooring to be fitted - area roughly 4mx2m.
New worktops to be fitted - laminate, roughly 7m.
New in-built oven and hob to be fitted.
New kitchen sink to be fitted.
Integrated dishwasher to be fitted - existing units need to be moved to fit this in.
All materials bought.
cut and fit worktops,make unit door
- Location: Newcastle Upon Tyne
- Hired: rob brown joinery
- Trade: Kitchen Fitting
- Positive feedback on 18th Jul 12
Job Description
install 2 lengths of oak worktop and join,router out cuts for belfast sink and single tap hole make new oak door for tall unit to match existing units,possibly plumb in belfast sink.
Fit kitchen work top, sink and taps
- Location: Wallsend
- Hired: SJ Installations
- Trade: Kitchen Fitting
- Positive feedback on 7th Jul 12
Job Description
Looking for someone to remove old kitchen work top, sink and taps. And replace with new kitchen work top, sink and taps
MyBuilder for Tradesmen
- Sign up
- Register as a Tradesman
- Express interest in jobs
- Choose the jobs you want
- Get Shortlisted
- Job posters will add you to their shortlist
- Win Work, Get Feedback
- Positive feedback gets you more work
- "Thanks very much for helping me to find work...its a great way to get work and equally as good for the public who need work doing."
- Rick Hughes
- Locations
- >Gateshead
- >Hebburn
- >Washington
- >Jarrow
- >Wallsend
- >Boldon Colliery
- >Chester Le Street
- >Blaydon On Tyne
- >East Boldon
- >South Shields
- >Rowlands Gill
- Building jobs in Gateshead, Tyne And Wear
- >Architectural Services
- >Bathroom Fitting
- >Bricklaying
- >Carpentry & Joinery
- >Carpet Fitting
- >Chimneys & Fireplaces
- >Conservatories
- >Conversions - General
- >Damp Proofing
- >Demolition & Clearing
- >Driveways
- >Electrical
- >Extensions
- >Fencing
- >Flooring
- >Garages & Sheds
- >Gas Work
- >Groundwork & Foundations
- >Handyman
- >Central Heating
- >Insulation
- >Kitchen Fitting
- >Landscape Gardening
- >Loft Conversions
- >New Builds
- >Painting & Decorating
- >Plastering
- >Plumbing
- >Restoration & Refurbishment
- >Roofing
- >Security Systems
- >Stonemasonry
- >Tiling
- >Tree Surgery
- >Windows
