Kitchen Fitting jobs in West Hendon, North London

Job Description

Fit a Howdens kitchen, plan attached.
Kitchen size approx: 7m sq

Work involves:
Take out and dispose old kitchen units
cut and fit worktops
Install new units, sink and taps (replace wastepipe to S bend)
Install new integrated dishwasher and fridge
Install and duct out new chimney extractor
Supply and install new fuse board to 17th edition
remove radiator
install supplied floor tiles

Flat on first floor, parking will be provided for conducting work.

Please quote and welcome to survey the place.

Job Description

We have a rented flat in Whit ton. Leaking tap set outside sink has rotted worktop and some of cupboard beneath. Need new sink with set in new tap, repair cupboard and new worktop around whole kitchen. Very helpful tenant. We have been let down by a couple of tradesmen due to their different family issues and so are keen to get this sorted for our tenant as soon as possible as she has only had hot water in the kitchen for some time now. Please advise if you can quote and time estimate.

Job Description

There are three things that need to be done in my kitchen:

1. Cold water connector pipe needs to be changed
2. Floor needs to be re-tiled (3 sq m approx)
3. Wall (plaster board) needs to be tiled (3 sq m approx)

All needs to be done within 2 weeks.

Job Description

Fit existing door to new machine please

Job Description

6th floor kitchen of roughly 12 sq. metres.

- Slight re-design needed for space saving, eg. integrating appliances to back wall for more worktop space.

- Removing existing kitchen and appliances & dispose of

- Fitting a composite worktop

- Fitting a stone floor, making sure the current underfloor can support this.

- splashback tiling to be fitted

- change electricals to spotlights on ceiling.

- under unit lighting installation

- Refitting appliances, and re-paint kitchen.

- We will supply the units, tiling, composite worktop and stone flooring.

Job Description

Looking for a kitchen fitter who will be able to

* Added 21st February, 2013 :
Looking for a kitchen fitter to;
- cut work surface for a hob & under mount sink (must have appropriate cutting tools)
- sanding down of said work surface to hide joins and also to sand additional work to match.
Required to start 28th February.

Job Description

Fitting ikea kitchen, 2 no full height cupboards, 6 no base cupboards, worktop with sink, dishwasher, gas hob, tap and splashback tiling.

Job Description

I'm very excited to be moving into my first flat and the kitchen is the biggest change needed.

Ex-local ground floor flat with private entrance. I will buy all materials.

Work required:

Remove:
70's units
floor lino
immersion tank
sink
two wooden wall cupboards
one brick corner floor to ceiling cupboard which houses the immersion tank

Fit:
B&Q Kitchen worth £2000 (excluding appliances) - I may request you to use a Trade discount card, however I think B&q current sale is the same?
approx 11 (wall and floor) units
wood worktops
under wall unit lighting
new pendant light (electrician service)
new sink (excluding fitting a Brita tap)
tiles on wall or splash backs (I haven't undecided)
new laminate wood floor

I'm looking for installation to start around 16th Feb, I've been advised it shouldn't take more than 10days.

I'm ideally looking for friendly no-nonsense honest builder looking to build upon his/her already successful client base.I will continue to use your services for all of my other future DIY projects!

I look forward to hearing from you.

Job Description

I have a wooden work top and it needs replacing with a laminate

Job Description

We just bought the flat and would like to renew the entire kitchen. Our kitchen is 3.5m x 3.4m and we will get the kitchen from IKEA. There are 3 tall wall cabinets (1 for boiler, 1 for fridge, 1 for oven), 6 base cabinets (1 for sink, 1 for washing machine, 1 for diswasher, 1 corner, 2 other). One of the tall wall cabinets needs to be fitted to cover the current boiler. Current kitchen does not have a dishwasher, but we would like to have one. Also, we would like to move the oven from its current location (1.5m to the right). Worktop is going to be laminate. The current floor is engineered wood but we would like to change it with laminate floors as well. Splashback tiles need to be fitted.

Job Description

If an email address is provided I can send pictures of my kitchen. Thank you.

I would like to have some work done in my kitchen. It would not necessarily be a full refurbishment however it needs some updating.
I would like the following to be done:
New work top about 3 metres
New sink & taps so some plumbing work would be required
Change doors on 5 of the units and 3 drawers.
Change one whole unit under sink and one unit on the wall
Change tiles
New floor in kitchen I am hoping to do this work in the next few months if possible.

My kitchen worktop at the moment is like a laminate effect, would like to change it for laminate wooden worktop. I would also like grey gloss doors, however I am prepared to compromise on this as I would like to stick within a budget.

The kitchen is supply and fit. Unfortunately I am not sure of the size of my kitchen however by most standard it is small. My flat is situated on the ground floor with a garden outside. I also have a parking area directly outside my home.

I am the owner of this property.

In addition would like to see how much painting the kitchen would include. I am really keen to have this work done and the only reason it is not starting straight away is due to work commitments however if I could receive a quote could see if perhaps some work could start next week.

I can email pictures of my property should you wish to see this.

Thank you

Job Description

fit new small kitchen (2 hi cupboards, ventilation unit, 3 under bench cupboards, new oven & hob, new sink, mixer, void for washing machine). U-shape: 1.7 x 2.6 (at wall) x 1.6 (1.6 length is bench top only, over stairs); first floor; supply and fit (rental property, basic spec); worktop - laminate; I can fit the plumbing; re-tiling may be needed, but I will do painting; I am the landlord

Job Description

Install free standing dishwasher (plumbing).
Replace kitchen tap, waste and overflow pipes.
Fit new base cabinet under the sink and end panel.
Replace two radiator valves, and compression isolating valve.
Hung the door and fix architrave.

Job Description

Please note that this job is 3 parts for a builder with plumbing and electrical skills:

Part A
Supply and Fit a replacement worktop:
* Remove existing worktop a kitchen approx 3 metre kitchen worktop with integrated frameless ceramic hob and Lamoa rutland single bowel sink
* Cut and Fit a kitchen approx 3 metre kitchen worktop with integrated frameless ceramic hob and Lamoa rutland single bowl sink
Granit look (coated wood chip). Howdens WOH4960

Part B
Supply and Fit:
Lay quick drying cement flooring to run under 0.5 metres under the washer/ sink unit. To even up loose the flooring.

Part C
Supply and fit:
Drill hole into external wall to fit ventilation/ flu for hob chimney hood extractor fan.

Please state:
Labour and materials separately
Work guarantee.

Job Description

We're looking to replace our kitchen (2.7m by 2.2m, three sides of units) and are looking for a fitter with an account at Howdens and/or Benchmarx. From doing some online research it sounds like different fitters get varying levels of discount at these two places, so it would be great if you can give us an indication of the discount you would be able to negotiate on the list prices!