Kitchen Fitting jobs in Orpington, Kent

Job Description

- fit worktop in kitchen,
- fit cornice, plinth and end panels to kitchen units,
- fit 6 x doors throughout the house,
- fit picture rails and skirting boards in dining room and front room.

Job Description

To fit a new kitchen consisting of 10 cabinets and 3 worktops. No change to the configuration is needed. The floor is wooden floorboards.

Job Description

Remove old units and sink. Fit a 200cm long wall of IKEA units to include a single integrated oven and fridge but no hotplate, new sink and worktop. Washing machine is already in place. No tiling needed.

Job Description

Remove 1 existing worksurface and sink.
Replace 1 worksurface (cutting to size)
Replace 1 sink, plumb in sink
Replace edging around worksurface as it joins to the wall.

Job Description

Hi, I am planning on fitting a new worktop (about 3meters) and install a built in electric oven and gas hob, the new worktop would need to be cut for the sink and gas hob, pipe work for the gas hob will need to be done and a new plug socket put in run up from under the floor boards

Job Description

The fridge door is not closing properly and it appears that it has come away from the cupboard door it is attached to, the clip that holds the fridge door to the cupboard door appears to be coming away and will need moving, however I may be wrong and it could be some thing else. Based in Hextable, need this job done now.

Thanks

Job Description

Remove existing kitchen to tip. Fit new kitchen. Cap gas hob - it will be a new electric hob. Approximately none base units and similar number of wall units. WE will supply all the cabinets and appliances etc. It will be an earthstone Wickes worktop. No tiling required. So the work will involve the electrics and the cabinets. We would expect the work to cost around £1500. New ash Green, kent

Job Description

Have designed and will probably purchase a new kitchen from Ikea.

Kitchen measures 3.9m x 1.7m.

I will strip out old kitchen and do tiling, painting, etc. myself. Need somebody to organise electrics (needs rewiring - may also include replacement of consumer unit), plumbing (sink & washing machine staying in current position but may need reorganising of pipes), worktop cutting and fitting and unit installation (we will put units together).

Approx. 6 - 8 units, with these appliances to be built-in:

Gas hob
Electric oven
Fridge/freezer
Cooker hood

Hope to complete work over Easter period - first two weeks in April.

Would like to get some quotes & advice for work.

Job Description

Four pieces of laminate worktop to fit (two joints, two sink cut-outs and one hob cut-out)
One breakfast bar worktop in solid walnut with custom shape to fit round units.
Also cut to size and fit end panels, shelves, plinth, cornice etc.

Job Description

Cut and fit laminate kitchen work top. Peninsular shaped kitchen with counter top run of approx 9m.

Job Description

Worktop replaced, old tiling off new tiling on, gas hob and oven and sink fitted and 2 lights fitted.

* Added 7th February, 2013 :
Patio door needs fixing

Job Description

Fitting small kitchen; 7 units, sink, solid wood worktops, integrated electric oven, gas hob, cooker hood and slimline dishwasher; tiling splashback area.

Job Description

Hi,

I need an old worktop removed and replaced with a new formica worktop (supplied). The length of the current kitchen surface is around 6 metres and we'll need to cut around a double sink too. There will be one joint as the worktop board is too short for the length of the kitchen. Also a couple of windows to extend the worktop into/possibly another couple of joints there.

Job Description

U shaped kitchen, 2 tall including fridge housing, 2 wall hanging units. 4 appliances, will need to move plumbing,electrics and gas maybe. remove and relay the floor tiles approx 7sqm.

Job Description

Rip out and install new kitchen. Plumbing gas cooker etc