Kitchen Fitting jobs in Rickmansworth, Hertfordshire

New Kitchen and redecorate upstairs

  • Location: Ruislip
  • Hired: C&M Refurbishment
  • Trade: Kitchen Fitting
Job Description

I will be renting out my 3 bed semi, and need a new kitchen and the bedrooms/hall to be redecorated. There are some other job including electrical points, external repairs, external painting and a leak in the roof to fix.

I would like the quote broken down by job (I have a list of jobs I can send).

I would prefer supply & fit, though this is not essential.

Budget is under £10k unless I can jusify more for extra rental value.

Email is preferred communication. I don't answer my phone at work.

New kitchen and bathroom - for small flat

  • Location: Pinner
  • Hired: prdecorator
  • Trade: Kitchen Fitting
Job Description

1. Remove old kitchen and replace - small kitchen. Tiling etc
2. Remove old bathroom and replace incl. tiling.

Kitchen Renovation

  • Location: Beaconsfield
  • Hired: Hammond Construction (Oxford) Ltd
  • Trade: Kitchen Fitting
Job Description

Removal of current utility room to create new open plan kitchen. Move downstairs loo to opposite side of house to create new room, create internal double doors between kitchen & Playroom (single door exists) and create double patio doors to garden (one window & back door exist). Supply and Fit kitchen, make good all areas of renovation including ceilings.

Kitchen maintenance

  • Location: Hemel Hempstead
  • Hired: Bateman Construction
  • Trade: Kitchen Fitting
Job Description

Rental property requiring some TLC to kitchen. Fitting new sink and taps with new worktop to match existing. Some general maintenance to existing cupboards, repainting kitchen walls.

Cooker Hood Installation Northolt, Middx UB5

  • Location: Northolt
  • Hired: Zendenis
  • Trade: Kitchen Fitting
Job Description

I need someone to dismantle an existing Integrated Cooker hood and install a new one. Also want to explore option of running venting to outside wall running it above the kitchen units. Existing cooker hood used in recirculating mode.

Looking to get it done Wednesday or after next week (20th March)

Fitting a new cooker.

  • Location: Harrow
  • Hired: ALTAIR BUILDING LTD
  • Trade: Kitchen Fitting
Job Description

I would like to fit a new cooker to my excisting kitchen unit and the removal of the old one.
It might involve some modification to the excisting unit.

Install worktop, 2 units, gas hob electric oven

  • Location: Hayes
  • Hired: Bis Contractor
  • Trade: Kitchen Fitting
Job Description

Fit worktop over 60 cm oven cabinet and 70 cm base cabinet.

These IKEA units have already been assembled but need to be fitted against the wall and bolted together.

Cut hole in worktop for gas hob. Put electric oven into oven unit.

Building of kitchen island

  • Location: Amersham
  • Hired: McGeough & son
  • Trade: Kitchen Fitting
Job Description

Building of kitchen island already supplied consisting of one pre-build drawer / cupboard unit, two wine racks, two side panels, one rear panel. Probably a 2 hour job, urgent response needed with fitting tomorrow morning ideally.

Installation of fridge freezer

  • Location: St Albans
  • Hired: Kelsey & Co
  • Trade: Kitchen Fitting
Job Description

Install fridge freezer. Previous one will have been removed

Move a cabinet so new washing m/c can be fitted

  • Location: Uxbridge
  • Hired: 21st century building and maintenance ltd
  • Trade: Kitchen Fitting
Job Description

Move existing 4 drawer unit from under worktop so there is space for a washing machine under the existing worktop. Reposition this unit on another wall and add new worktop over it (length to be advised, around 1.5m) - this worktop to extend wider than the unit and have a chrome pole for support. Fit plumbing (water supply and drain) for washing machine.

IKEA Fitted Kitchen Installation

  • Location: St Albans
  • Hired: K-Z building service
  • Trade: Kitchen Fitting
Job Description

To install the carcases (excluding doors and most of the fittings) for an IKEA fitted kitchen.

To create and leave cut-outs for 3 power-outlets

To fit the worksurfaces.

To fit and plumb sink and tap. This will require (i) re-routing hot and cold water pipes to run under one unit and to emerge in the adjacent sink unit and (ii) possibly the re-routing of the waste pipe.

To seal the worksurface between wall and surface

To fit Extractor cooker hood. This may require the present hole in the wall to be partly bricked up (3 bricks) and/or a new one cut.

The kitchen has 9 x 90cm tall wall cupboards. The base units (x7) are to be fitted by batons and legs – there is a plinth but this should be left as removable as electrical work will be done under it at a later date.

The kitchen is approx 3m x 3m and 2.8m high. The floor is newly tiled. The kitchen (presently in flat-pack) sink, tap, and cooker hood are at the house.

* Added 17th October, 2012 :
The kitchen is completely empty. The old units have gone, the electrics and plastering have been done.

New kitchen fitting

  • Location: Amersham
  • Hired: n-vico
  • Trade: Kitchen Fitting
Job Description

Our kitchen needs to be done. Work involves: disposing existing old kitchen, fitting the new kitchen that includes cabinets, wiring, plumbing, appliances, flooring, painting walls and the odd things such as hob extractor fitting needed to finish the kitchen. Work will be scheduled between last week of December and first week of Jan 2013 (date not changeable). If you cannot take up the job within this schedule please do not bid.

Kitchen is already planned and all fittings, appliances will be provided. When bidding, please ask via email for kitchen plan which includes measurements, what goes where, etc.

Identify a dishwasher to fit space + installation

  • Location: Pinner
  • Hired: Z Maric
  • Trade: Kitchen Fitting
Job Description

Need someone to identify dishwashers that will fit under counter (recess dimensions are 81.5 cm max height from floor; 60 cm width). We will choose from the list, order online and have it delivered. The tradesperson will then need to visit and install it. I am happy to measure the recess space and give measurements online/over phone if that makes things go quicker. There was an integrated dishwasher installed previously in the space so expect no issues with plumbing/electrical connections.

New sockets ,plump in dishwasher and tiling

  • Location: Uxbridge
  • Hired: Zendenis
  • Trade: Kitchen Fitting
Job Description

6 Additionalsockets ,plump in dishwasher and tiling wall and flooring.
If registered disconnect old cooker and connect new gas hob.

Install kitchen into a new build extension

  • Location: Harrow
  • Hired: dan&son
  • Trade: Kitchen Fitting
Job Description

13 units wooden frame kitchen units, plumbing in sink and insinkerator, electric hob, housed double oven, plumb in fridge freezer, mosaic tiling 2sqm, fit splash back, 2 plinth panel heaters

* Added 3rd December, 2012 :
Ezystone worktop

MyBuilder for Tradesmen

Sign up
Register as a Tradesman
Express interest in jobs
Choose the jobs you want
Get Shortlisted
Job posters will add you to their shortlist
Win Work, Get Feedback
Positive feedback gets you more work
"I have previously advertised in big named phone books at extortionate prices and find that this site's finders fee is well worth paying."
Robert Day
Locations
>Rickmansworth
>Northwood
>Chalfont St Giles
>Watford
>Kings Langley
>Gerrards Cross
>Abbots Langley
>Pinner
>Bushey
>Amersham
>Ruislip