Kitchen Fitting jobs in Walthamstow, East London

Job Description

we will buy the kitchen from diy-kitchens.com and it will be delivered and units arrived aleady mounted.

The kitchen is to be in a new extension which already has water pipes and electricity, no need to remove any old kitchen.

Work needs to include:
- fitting the units
- connecting electricals (for fridge, oven, microwave, freezer, induction hob, extractor hob with pipe to the outside)
- plumbing (need to move the pluming pipe for sink by 2m)
- worktops installation (solid surface like Apollo, Maia)
- undermount sink
- moving/replacing double sockets
- no flooring needed

Looking to get the kitchen installed in April

Job Description

Kitchen, fit only: 7 units including larder unit, washing machine, slimline dishwasher, oven, hob, extractor fan, undermount sink, solid oak worktop, small breakfast bar, 3 shelves, floor tiles and splashback tiles on wall. Supplier = Homebase

Bathroom: replace toilet, sink, cabinet and tile the floor. Possibly supply parts too if easier?

Job Description

Fit a Howdens kitchen, plan attached.
Kitchen size approx: 7m sq

Work involves:
Take out and dispose old kitchen units
cut and fit worktops
Install new units, sink and taps (replace wastepipe to S bend)
Install new integrated dishwasher and fridge
Install and duct out new chimney extractor
Supply and install new fuse board to 17th edition
remove radiator
install supplied floor tiles

Flat on first floor, parking will be provided for conducting work.

Please quote and welcome to survey the place.

Job Description

Remove old worktops, shelves and sink and replace with new

Remove wall tiles and replace with new

Remove old flooring and replace with tiles

Job Description

6th floor kitchen of roughly 12 sq. metres.

- Slight re-design needed for space saving, eg. integrating appliances to back wall for more worktop space.

- Removing existing kitchen and appliances & dispose of

- Fitting a composite worktop

- Fitting a stone floor, making sure the current underfloor can support this.

- splashback tiling to be fitted

- change electricals to spotlights on ceiling.

- under unit lighting installation

- Refitting appliances, and re-paint kitchen.

- We will supply the units, tiling, composite worktop and stone flooring.

Job Description

Fitting ikea kitchen, 2 no full height cupboards, 6 no base cupboards, worktop with sink, dishwasher, gas hob, tap and splashback tiling.

Job Description

I'm very excited to be moving into my first flat and the kitchen is the biggest change needed.

Ex-local ground floor flat with private entrance. I will buy all materials.

Work required:

Remove:
70's units
floor lino
immersion tank
sink
two wooden wall cupboards
one brick corner floor to ceiling cupboard which houses the immersion tank

Fit:
B&Q Kitchen worth £2000 (excluding appliances) - I may request you to use a Trade discount card, however I think B&q current sale is the same?
approx 11 (wall and floor) units
wood worktops
under wall unit lighting
new pendant light (electrician service)
new sink (excluding fitting a Brita tap)
tiles on wall or splash backs (I haven't undecided)
new laminate wood floor

I'm looking for installation to start around 16th Feb, I've been advised it shouldn't take more than 10days.

I'm ideally looking for friendly no-nonsense honest builder looking to build upon his/her already successful client base.I will continue to use your services for all of my other future DIY projects!

I look forward to hearing from you.

Job Description

We just bought the flat and would like to renew the entire kitchen. Our kitchen is 3.5m x 3.4m and we will get the kitchen from IKEA. There are 3 tall wall cabinets (1 for boiler, 1 for fridge, 1 for oven), 6 base cabinets (1 for sink, 1 for washing machine, 1 for diswasher, 1 corner, 2 other). One of the tall wall cabinets needs to be fitted to cover the current boiler. Current kitchen does not have a dishwasher, but we would like to have one. Also, we would like to move the oven from its current location (1.5m to the right). Worktop is going to be laminate. The current floor is engineered wood but we would like to change it with laminate floors as well. Splashback tiles need to be fitted.

Job Description

If an email address is provided I can send pictures of my kitchen. Thank you.

I would like to have some work done in my kitchen. It would not necessarily be a full refurbishment however it needs some updating.
I would like the following to be done:
New work top about 3 metres
New sink & taps so some plumbing work would be required
Change doors on 5 of the units and 3 drawers.
Change one whole unit under sink and one unit on the wall
Change tiles
New floor in kitchen I am hoping to do this work in the next few months if possible.

My kitchen worktop at the moment is like a laminate effect, would like to change it for laminate wooden worktop. I would also like grey gloss doors, however I am prepared to compromise on this as I would like to stick within a budget.

The kitchen is supply and fit. Unfortunately I am not sure of the size of my kitchen however by most standard it is small. My flat is situated on the ground floor with a garden outside. I also have a parking area directly outside my home.

I am the owner of this property.

In addition would like to see how much painting the kitchen would include. I am really keen to have this work done and the only reason it is not starting straight away is due to work commitments however if I could receive a quote could see if perhaps some work could start next week.

I can email pictures of my property should you wish to see this.

Thank you

Job Description

I am looking for kitchen cabinets fixing quote along with fixing kitchen flooring damage due to water leak.

Job Description

fit new small kitchen (2 hi cupboards, ventilation unit, 3 under bench cupboards, new oven & hob, new sink, mixer, void for washing machine). U-shape: 1.7 x 2.6 (at wall) x 1.6 (1.6 length is bench top only, over stairs); first floor; supply and fit (rental property, basic spec); worktop - laminate; I can fit the plumbing; re-tiling may be needed, but I will do painting; I am the landlord

Job Description

Please note that this job is 3 parts for a builder with plumbing and electrical skills:

Part A
Supply and Fit a replacement worktop:
* Remove existing worktop a kitchen approx 3 metre kitchen worktop with integrated frameless ceramic hob and Lamoa rutland single bowel sink
* Cut and Fit a kitchen approx 3 metre kitchen worktop with integrated frameless ceramic hob and Lamoa rutland single bowl sink
Granit look (coated wood chip). Howdens WOH4960

Part B
Supply and Fit:
Lay quick drying cement flooring to run under 0.5 metres under the washer/ sink unit. To even up loose the flooring.

Part C
Supply and fit:
Drill hole into external wall to fit ventilation/ flu for hob chimney hood extractor fan.

Please state:
Labour and materials separately
Work guarantee.

Job Description

Cut and fit laminate kitchen work top. Peninsular shaped kitchen with counter top run of approx 9m.

Job Description

Wickes (New Jersey) kitchen.
Kitchen size area 2270 X 3720 (8.4 m sq)
1. Removal and disposal of existing units
2. Installation of 12 units (incl decorative ends, fillers, cornice, pelment, plinth doors and handles
3. Installation of sink and taps
4. Installation of Zanussi Chimney Hood
5. Laminate worktop
6. Intstall supplied wall tiles / splashbacks. Painting as required (need to obtain/area yet to be determined).
7. Plumbing for dishwasher
8. Lay supplied vinyl tiles on concrete floor (need to obtain)

Electricity / water plumbing are mostly in the right place, so no change in cofiguration except with dishwasher. All appliances are standalone.

Although the flat is a 1960s build and electrical circuitry may need modernising. One electrical point may need to be moved to be close to fridge freezer and as required for Chimney hood.

Free parking at rear of flats. Flat on second floor.

Hope that just about covers it!

Steve

Job Description

cutting and fitting 120 cm of oak worktop and sink. removal of old work top and sink. removal of small patch of tiles (approx 60x60cm) and tiling above worktop (approx 280x70cm).