Kitchen Fitting jobs in Cheadle, Cheshire

Job Description

To replace kitchen worktops install new sink and replace cupboard doors

Job Description

Units already on site and will be made up ready.
6 x base units (2 x corner)
7 x wall units (1 x corner)
and standard worktops.
Would also like quote to include for plumbing in dishwasher, washing machine & sink

Job Description

hi, due to a total rewire required, we had to remove all ikea units from kitchen, plus radiator. all the base units and wall units need to be reinstated. the room is being replaster ed ready. extra units will be bought to extend to the otherside of the kitchen, along with new side panels and doors for all units. along with new solid wood worktops that will need to e cut to size. various other small jobs also like new loft hatch ect.

Job Description

fit new worktop to existing kitchen units. 2 x short L pieces one with a sink cut out

Job Description

I have a small 2 bed flat with some minor upgrades needed. I have two kitchen worktops that need fitting, plastering on the wall behind, new Kitchen sink with taps fitting, new oven fitting, extractor fan hood fitting. Competitive quote needed first.

Job Description

We have a rental property that is empty in March. We need a kitchen fitted and spotlights put in before the next tenants move in on the 27th of March! It is a kitchen dining room about 5.2m x 2.6m with the units taking up about half the space. There are approx 7 base units and 4 wall units at the moment but we may add a floor-to-ceiling wall unit. The plumbing will stay the same and we have a SMEG cooker that will stay. We would like the splashback tiled and spotlights placed at intervals throughout the whole ceiling.

Job Description

We have a circular kitchen cupboard which has a complicated mechanism attached to both doors. The whole thing has broken so we'd like a shelf putting in it's place and some new hinges on the doors.

Job Description

I require a top quality joiner to install a quality kitchen and utility (approx 20 units) including relevant appliances and wooden work tops. The units are pre assembled and not flat packed and all of the existing kitchen has been removed, re-plastered and redecorated. All electrics have been completed and the plumbing remains in its existing position. There is approximately 1 - 1.5 weeks work and there is cash waiting for the right price. References and previous work examples required.

Job Description

Install kitchen including building, plumbing and electrical works

Job Description

To begin with the kitchen floor needs to be tiled (approx 13ft x 9ft). I've purchased an IKEA kitchen with approx 7 base cupboards and 5 wall hung cupboards. Hob, extractor fan and oven are all integrated and need fitting. The plumbing will need to be put in for the sink and washing machine. Gas pipe for hob is already there, it just needs attaching.

Job Description

Joiner or a good "Mitre" person to cut and fit corniche and pelmet to kitchen cupboards.

Several cuts (13) and some obtuce angles however this should be a "doddle" to any competent joiner.

I have all the materials and mitre glue.

Job Description

Hi I'm wanting my kitchen worktop replaced as starting to chip etc

Job Description

fitting kitchen worktops, possible re fitting of cabinets

Job Description

we're doing a kitchen with an difficult (for us) shaped worktop.
we'll need the new cupboards levelled
the worktops (upstands) cut and fitted to size and tidied up. (hole for sink etc)
worktops approx 2m, and 1mx 3.75m L shape - estimated measures.
worktop material undecided at minute but will be not be granite! likely acrylic or wood based.

Also require tiling in Kitchen - but wouldn't let me change title - tiling approx less than 1m high by 10m with sockets/splasback (needing fitting) and wiindow etc to work round!
(sizing very approx)

Job Description

Cooke & Lewis kitchen purchased, total of 25 units, wall & base. Worktop, sink etc (worktop is Laminated) Electrician has been sorted for wiring the under cupboard lights ceiling lights etc. B & Q CAD design plan to show what goes where.