Kitchen Fitting jobs in Chesham, Buckinghamshire

Job Description

Remove old kitchen units and dispose of
Fit 12 units, flat pack on two sides of kitchen
Fit worktop 2 x 3m lengths
Fit sink & taps
Tile walls
Paint walls
Re-install existing dishwasher, washing machine, fridge, gas cooker, extractor hood
Lay laminate flooring in kitchen & hall approx 10 sq m total
Lay electric underfloor heating in kitchen and hall

Kitchen units, sink, taps, flooring, tiles, underfloor heating will be provided.

Job Description

Rental property requiring some TLC to kitchen. Fitting new sink and taps with new worktop to match existing. Some general maintenance to existing cupboards, repainting kitchen walls.

Job Description

Building of kitchen island already supplied consisting of one pre-build drawer / cupboard unit, two wine racks, two side panels, one rear panel. Probably a 2 hour job, urgent response needed with fitting tomorrow morning ideally.

Job Description

Our kitchen needs to be done. Work involves: disposing existing old kitchen, fitting the new kitchen that includes cabinets, wiring, plumbing, appliances, flooring, painting walls and the odd things such as hob extractor fitting needed to finish the kitchen. Work will be scheduled between last week of December and first week of Jan 2013 (date not changeable). If you cannot take up the job within this schedule please do not bid.

Kitchen is already planned and all fittings, appliances will be provided. When bidding, please ask via email for kitchen plan which includes measurements, what goes where, etc.

Job Description

supply and fit worktops - some unusual angles!
Fit sink, gas hob and built in electric cooker
supply and fit extractor fan

Job Description

Fit Laminate (oak effect) worktop in kitchen, (we have bought 3x3 metre sections) Will need a cut out for sink, cut out for gas hob. We also want tension bolts rather than metal strips on any joints

Install hob, electric build under cooker. So ideally gas safe registered.

We're looking to have this done as soon as possible so ideally need a quote over the next couple of day if possible?

Only 100% positive feedback with reviews please! :)

* Added 2nd December, 2012 :
Forgot to add we have the gas hob, electric oven here in factory packaging as well as the worktop ready to install.

Job Description

Adjust existing cabinets to fit a dishwasher

Job Description

We need to have a new kitchen & utility room - we are having it designed middle of September by John Lewis and will be buying units which are fully assembled. In the kitchen - Not sure how many units yet but at a guess approx. 12 -13 plus drawers and we are having a freestanding dresser. We need to have existing kitchen removed - including some tile removal & dado rail removal. Existing floor covering (I think wood style laminate & tiles) need removal and floor needs levelling in some places, an old serving hatch behind tiles needs to be removed and boarded up. Appliances we are having are freestanding range cooker, free standing fridge freezer american style, butler sink. Plumbing needs to be included but electrics will be dealt with by a family member who is a qualified electrician. We need a small amount of tiling behind cooker and on windowsills. Ceiling needs to be boarded and plastered and walls will need plastering too. We are looking at having a quartz worktop in the kitchen.

Size of kitchen is 5.03m x 4.11m
Plus small utility room - will need plastering walls & ceiling & new sink installed and probably 1 base unit and 1 double wall unit and small amount of worktop - probably wooden or laminate.

* Added 7th September, 2012 :
We are also having a full-size integrated dishwasher which will need to be installed.

Job Description

Remove and replace an existing kitchen. Remove floor tiles and re-tile floor and some wall areas. Plaster ceiling and walls and paint them. Possibly install some sockets and some plumbing. Make good a hole in the wall where a gas flue was removed. Install appliances including gas hob. Work to be commenced as soon as possible

Job Description

Wickes design and units.

Removal of:

- Existing units + sink
- Working free standing oven

Installation of:

3x Wall Units
2x Corner Base 1000mm Units (straight, not L)
1x 500mm Base Drawer Unit
1x 500mm Base Unit
3x Doors Fitted to existing full height cupboard (but taken from 500mm units)
2x Wine Rack

Building work:

- Cutting and re plastering of a box (need to lower the height in order to put work surface over the top, gas meter currently inside this box, no obstructions)
- Tiling of floor (ceramic) approx. 8m2
- Worktop approx. 3x3m
- Sink and hob placement in worktop

Electric work:

- Fitting of oven, oven hood, fridge, freezer and tumble dryer

Gas work:

- Fitting of gas hob

Plumbing work:

- Fitting of sink, taps and washing machine

-------

Viewing can be done on weekends or weekdays after 7pm. Do not hesitate to contact with any questions.

* Added 2nd September, 2012 :
-------- EDIT -----------

I have now removed existing cabinets and oven will be removed. There will need to be some plastering done (the original cabinets were nailed into the wall).

Appliances have been bought (delivery on 15th) but need to be fitted.

SOME electrical work required - for oven, fridge and freezer (due to there only being one socket) and tumble dryer (no existing socket on right hand side of kitchen).

Ideally I would like to use Benchmarx (from Travis Perkins) units which are the same as Wickes but already assembled so a trade account would be a bonus.

Job Description

Fit out of complete extension including kitchen fitting, decoration, tiling, door fitting (internal and external) & appliance fitting.

Job Description

fit only - units, work surface (acrylic) sink.
Appliances to be fitted - oven
Tiler woud be useful
Please provide comprehensive quote or arange inspection & quote?

Job Description

Removal of old kitchen and supplying/fitting of new kitchen - including plastering, tiling, plumbing, gas, electrics.
Size: Approx 2m x 3.5m

Job Description

Our new Kitchen has just arrived we need a fitter to fit the new kitchen it's about 15 unit in total

Job Description

Replace existing worktops with laminated Wickes worktops - 4 lengths of worktop approx 20ft in total. Create small bar area with chrome post (not supplied)from worktop. Fit new supplied granite composite sink, mixer tap, new electric hob, cap existing gas supply. Remove existing splashback tiling and replace with supplied 4 inch square ceramic tiles approx 20ft of wall length - two types in chequer pattern. Remove and replace 4 lengths of base unit plinths with supplied B & Q black gloss, including removal of old plinth air heater. Remove lino and tile floor with supplied ceramic floor tiles, approx max 13ft x 10ft. Install supplied new 600mm base unit and door. Replace existing power points with new ones supplied. Plaster skim to 2ft x 4ft area of wall. Install under wall unit lighting using existing electrics.