Kitchen Fitting jobs in Windsor, Berkshire

Job Description

Two 1000mm B&Q wall cupboards to be installed in utility room.

Job Description

Assembly of kitchen plus joinery on solid wood counter

Job Description

Take out kitchen cupboard in new home and fit slimline dishwasher in the housing available, fit with door closed to conceal in keeping with the kitchen. Bit fiddly but can be done easily by a trained person. No plumbing required already plumbed. But electrical supply will be needed.
I have had this job assessed by other carpenters/joiners kitchen professionals, so I am told it can be done.

Have lots of other carpentry work coming up for a good reliable trades-person.

* Added 3rd April, 2013 :
I am back from holiday so wish to invite other people to quote. I have received a quotes so far for around the £100 mark but worker was not available. Quotes invited from those who are skilled craftmen with carpentry/kitchen fitting experience.
Please view for further clarification of work involved.

Job Description

Experienced kitchen fitter/carpenter required for 2 days work, preferably on the 19th/20th of March.

- I will be stripping out the existing units so the room should be bare (or 90% at least)
- The units will all be arriving pre-built so it's just a case of positioning and securing them to one another and the walls. There are cabinets down two sides of a galley kitchen, so approx 10-12 cabinets of varying sizes plus several wall cabinets.
- Wooden worktops need cutting down to size, plus securing and cut outs for sink and hob made. 1 2.3m straight run and a 2.7m L shaped run.
- Wooden upstands need cutting to length, plus mitreing
- Plinths and end panels all need to be cut to length and installed (4 end panels + 5 metres of plinth)
- Hanging the two wall cabinets
- Mounting the chimney extractor hood
- Installing door furniture (doors are pre-hung so just handles)
- Making good where required

(The plumber will be sorting the gas and water connections so no need to worry about those).

Please let me know availability and experience. Preference will obviously be given to those trades who are fairly local.

Job Description

Fit worktop over 60 cm oven cabinet and 70 cm base cabinet.

These IKEA units have already been assembled but need to be fitted against the wall and bolted together.

Cut hole in worktop for gas hob. Put electric oven into oven unit.

Job Description

As above. Needed tomorrow (9th march)as been let down. In ashford middlesex tw15.
Job is to cut sink and hob and fit work top and small breakfast bar.

Job Description

I require the fitting of an L shaped worktop, 2.6m x 1.9m to include a kitchen sink cut out. New free standing mini range oven being fitted therefore worktop will need to be cut as necessary.
Exisiting kitchen worktop is L-shaped 2.6m x 60 x 38 with sink cut out, 1.9m x 60 x 38 with hob cut out.

Job Description

I am looking for some one to Install laminate kitchen work tops on to pre fitted carcase which will entail one joint being made between two top's.

Job Description

Install cold water outlet for washing machine & dish washer. Replace carpet with ceramic wall tiles of an area approximately 10m2

Job Description

Move existing 4 drawer unit from under worktop so there is space for a washing machine under the existing worktop. Reposition this unit on another wall and add new worktop over it (length to be advised, around 1.5m) - this worktop to extend wider than the unit and have a chrome pole for support. Fit plumbing (water supply and drain) for washing machine.

Job Description

6 Additionalsockets ,plump in dishwasher and tiling wall and flooring.
If registered disconnect old cooker and connect new gas hob.

Job Description

I would like to replace my work top and kitchen sink

Job Description

To install a kitchen in the current utility room. All goods to be supplied (as confirmed). Waste to remain on site.
Works to include:
- Removal of current 3 base units, two wall units, worktop, butler sink and tiles.
- Remove radiator, fit central heating plinth heater.
- Fit units (4 base units, 2 wall units), pelmets, plinth, worktops 1x1.6m, 1x2m.
- Fit sink with plumbing for washing machine.
- Fit chimney hood and freestanding electric cooker (cooker circuit required)
- Install one double plug socket above worktop, in addition to cooker + 1 socket). - Tile walls (c. 1.6m2)

Room size c. 2.85m x 2.20m.
Pictures of room as-is and of draft layout attached.

Job Description

We require a kitchen fitter to complete the kitchen in our house. Old kitchen has been removed already, and new kitchen already delivered.

Kitchen is from Ikea, size of room is just under 9m2 and U shaped. Fitting and connection of all appliances is also required (fridge freezer, oven, gas hob, microwave oven, dishwasher, washing machine)

Worktop is solid oak and will need to be cut to size.

The floor (Engineered wood) + the underlay, also needs to be fitted as part of the job.

We need the job to take place and be completed between 13th& 21st August. Dates are not really flexible due to other work being done on the house.

If you are available and interested please send me an initial quote. Due to the timings we are keen to hire someone asap.

Job Description

Have bought a 2nd hand kitchen and need it to be fitted, have cleared existing kitchen so there is only the sink left. Need some ideas of where to put things and how things will all fit in and then someone to install it