Kitchen Fitting jobs in Reading, Berkshire

Job Description

I'm looking for someone to put together a design for my kitchen and Cary out the work. It's a typical Victorian terrace with a galley kitchen. Before the fitting job starts I will be removing all the old units and will be getting a damp specialist in to solve damp issues and replaster. I will need someone who is able to commit to a date to commence the work immediately after the damp company finish. I see the job starting with tiling he floor (I already have the tiles) and the moving onto the units. There is nothing out of the ordinary about the kitchen that I require although the job will involve boxing in a boiler and some pipe work and some minor reorganisation or plumbing and electrics. I'm not moving any gas or cooker electric points just making sure that the dishwasher and washing machine get hot and cold water plus moving Worksop sockets to fit the new layout. Under unit lights are also required. I'm looking for all appliances to be built in and for the job to start middle to end of February although dates can be flexible if its the right thing for me to do.

Job Description

2 Laminate Worktop cutting & fitting for kitchen 3mx2m, additionally wall tiling 2msq for property to rent

* Added 13th February, 2013 :
Plinth cutting & fitting

Job Description

Hi I am looking for a carpenter to fit a window board, new work tops and spash backs, new sink and new cooker hob. Walls have been plastered today and a little work to do for the window board to be fitted. Materials being delivered this Friday and am looking for somebody to come one day next week please. Regards Cathy

Job Description

We need a new kitchen! I’m looking for someone to remove our old kitchen and ideally supply and fit a new one, including all appliances, tiling, plumbing, lighting, and painting and decorating.
Our current kitchen has about 20 units on the floor and walls, a sink, dishwasher, fridge freezer, hob, oven, and extractor.

I'd really like the work to start in the next few months.
Thanks

Job Description

To install a kitchen in the current utility room. All goods to be supplied (as confirmed). Waste to remain on site.
Works to include:
- Removal of current 3 base units, two wall units, worktop, butler sink and tiles.
- Remove radiator, fit central heating plinth heater.
- Fit units (4 base units, 2 wall units), pelmets, plinth, worktops 1x1.6m, 1x2m.
- Fit sink with plumbing for washing machine.
- Fit chimney hood and freestanding electric cooker (cooker circuit required)
- Install one double plug socket above worktop, in addition to cooker + 1 socket). - Tile walls (c. 1.6m2)

Room size c. 2.85m x 2.20m.
Pictures of room as-is and of draft layout attached.

Job Description

We have bought some second hand kitchen units, which are old but serviceable, and we are hoping we can turn them into a smart, traditional style kitchen. These will be supplemented with a couple of new units, including a belfast sink.

We are looking to have an oak worktop fitted, and will need cornicing/side panels etc that we can paint along with the doors to achieve a matching finish.

As the units we have bought were from a different sized kitchen, there will need to be some resizing / creative joinery to make them fit.

We are hoping to have the work finished by the end of September so please only respond if you can quote next week and are available in the weeks after that.

Many thanks,

Bill & Amanda

Job Description

Earlier in the year a kitchen unit was removed to make way for installation of new boiler in its place. I need someone to re-fit the kitchen unit over the boiler. The boiler is small enough to fit inside the unit, however some modifications will be required. Many thanks.

Job Description

Economic kitchen refurb required to aid sale. 3 jobs - replace kitchen worktops, replace tiling, replace back door.
1) Change existing kitchen worktop. 4 sections altogether. 3 sections with two joints. Dimensions (M) 1.60, 2.39 and 0.94 = sink/drainer arm, main cross piece with hob/corner arm.. The 4th is a separate section of 92cm = with angled edge to allow door exit. D=<60cm. H=3cm. Work needs to be done asap. We would provide materials unless you can source at a better price. Carpentry skills required.
Note Hob to be replaced before or after fit as sensible.
2) Tiling adjoining worksurfaces 3.25Msq.
3) Replace kitchen door and make good.

Job Description

Kitchen needs to be fitted- all units have been fitted by a builder (minus some of the doors)- but the units need re-jigging as some dont mate up properly. Also oak counter top needs to be installed properly. The builder i was using was unreliable and workmanship was not good. Please call me to arange a quote. Thanks James

Job Description

remove existing kitchen and bathroom and fit new. remove all rubbish. must be available to start 23rd October

Job Description

5 base units and 4 wall units added on to my current kitchen.

Dishwasher plumbed in

Wiring for new double oven, built in microwave and induction hob (currently have gas) and fridge freezer

New worktop fitted

Floor and wall tilling

Light switch moved

* Added 6th September, 2011 :
I have the units, worktops etc already so this is for labour only.

Job Description

The existing integrated elica cooking hood does not work properly and need a replacement. Can you please quote the costs of decommission and installation for labour only (i.e. I will buy the replacement elica) and for also including the material i.e. new replacement of integrated elica cooking hood.

Job Description

I need the worktop cut and fitted to the units - 2 joins needed to make U shape run. I need holes measured and cut for the new sink and the gas hob. Worktop is 2 x 3m pieces, room is 3320mm wide.

The hob needs connecting to the gas point which is at skirting board level, so some new pipework required.

Cupboards aren't levelled or attached to wall as I figured they'd need to come out to do gas pipe.

Probably need to cut into door frame a little to fit the right hand side cupboard/worktop.

Picture link below. On left hand side, worktop needs to continue over dishwasher to meet wall. On right hand side (where I'm standing to take pic) it will come right up to the door, hence frame might need a bit taken out to accomodate.

http://dl.dropbox.com/u/3523115/IMG_0047.JPG

* Added 16th January, 2011 :
Timeframe: Not in an urgent hurry, but would like it sorted by the end of the month ideally.

Job Description

To fit a new Homebase-purchased kitchen (flatpack, already in possession) in a house. The old kitchen has already been removed. Appliances to be fitted include a free-standing electric cooker (suitable wall socket for electrics available), a new extractor fan and a washing machine (plumbing done). A sink also needs to be fitted.

Job Description

remove existing kitchen units and put new units, worktop and integrated appliances. Floor & wall tiling and other electric & plumbing as required.